Tomcheck Posted September 18, 2008 Report Share Posted September 18, 2008 there is an option called ACHP (or something like that), that may be Enabled or Disabled. Try switching the current setting of that option in bios. I think its in the advanced menu, but i may be wrong. Quote Link to comment Share on other sites More sharing options...
Korso Posted September 18, 2008 Report Share Posted September 18, 2008 there is an option called ACHP (or something like that), that may be Enabled or Disabled.Try switching the current setting of that option in bios. I think its in the advanced menu, but i may be wrong. OK, I'll try and tell you. Thanks a lot for your kind answer. Quote Link to comment Share on other sites More sharing options...
Korso Posted September 18, 2008 Report Share Posted September 18, 2008 OK, I'll try and tell you. Thanks a lot for your kind answer. It works! Thanks a million dude :) Never thought it could be that bios setting :) Quote Link to comment Share on other sites More sharing options...
Tomcheck Posted September 18, 2008 Report Share Posted September 18, 2008 You,re welcome. You bought your machine with the OS preinstalled, didn't you? Because i bought it without any software and so i had that problem already when i tried to install the OS. Quote Link to comment Share on other sites More sharing options...
Guest slan Posted October 13, 2008 Report Share Posted October 13, 2008 So, i have BIOS v. 1.19, the diference from 1.18 is only, that DEP/NX for Intel Merom/Penryn Processors is enable. You must make DOS disk for the flash and type ft001195s, after flashing go in the BIOS and choose "load defaults"->"yes" or clear CMOS. :) Bios for Compal Quote Link to comment Share on other sites More sharing options...
Nicram Posted October 18, 2008 Author Report Share Posted October 18, 2008 (edited) Yep, there is new BIOS, i prepared ISO as usual :) http://www.itos.asia/download/compal119.rar http://www.marcinwilk.eu/compal119.rar Edited November 7, 2010 by Nicram Quote Link to comment Share on other sites More sharing options...
Guest KuA Posted October 22, 2008 Report Share Posted October 22, 2008 Hi, thank for this useful post When I try to update the bios, the next message appears: "Could not find BCP DMI block in BIOS ROM file image PRESS A KEY TO RESTART" Anyone has any idea? I follow all the steps carefully and I have try with different bios versions. I have a Compal fl90 with 1.04 bios thanks Quote Link to comment Share on other sites More sharing options...
Nicram Posted October 22, 2008 Author Report Share Posted October 22, 2008 Hi, thank for this useful postWhen I try to update the bios, the next message appears: "Could not find BCP DMI block in BIOS ROM file image PRESS A KEY TO RESTART" Anyone has any idea? I follow all the steps carefully and I have try with different bios versions. I have a Compal fl90 with 1.04 bios thanks Did You try to update to 1.05 first? Did You use my .iso files or some other way? Did You try emergency disk method? Quote Link to comment Share on other sites More sharing options...
Guest KuA Posted October 23, 2008 Report Share Posted October 23, 2008 Did You try to update to 1.05 first? Did You use my .iso files or some other way? Did You try emergency disk method? Well, I've try to update to 1.12, .13, .16, .18 and .19, but I haven't found the 1.05version. I have use all your iso files, and I have tryed it by burning cd and by usb hd method. The problem appears after de phlaser does the backup bios copy, in the step4 of the process, I think I have also tryed it by using the Winphlaser by Phoenix, and after various problems still solved, the program stops, and my computer tills. Emergency disk method? what's that? thanks for ur response Quote Link to comment Share on other sites More sharing options...
Nicram Posted October 24, 2008 Author Report Share Posted October 24, 2008 Tru to update to 1.06 first then using BIOS from compal website. Then if it will not work, we will try emergency disk method (it is restoring bios from the FDD that is connected to USB, it is usefull when laptop freeze when bios update process is running & don't wanna to boot after that). Quote Link to comment Share on other sites More sharing options...
Guest kua Posted October 25, 2008 Report Share Posted October 25, 2008 Tru to update to 1.06 first then using BIOS from compal website. Then if it will not work, we will try emergency disk method (it is restoring bios from the FDD that is connected to USB, it is usefull when laptop freeze when bios update process is running & don't wanna to boot after that). Yeah! thanks for your help, I had actualiced to 1.06 Let's try something higher :) thanks a lot Quote Link to comment Share on other sites More sharing options...
Nicram Posted October 25, 2008 Author Report Share Posted October 25, 2008 I'm happy then :) Quote Link to comment Share on other sites More sharing options...
Guest Guest Posted November 2, 2008 Report Share Posted November 2, 2008 When I use 1.19 bios for FL90 doesn't work VT (virtualization) but works DEP. I have t8100. What can i do to VT works? Thanks Quote Link to comment Share on other sites More sharing options...
Guilherme Françoso Posted November 3, 2008 Report Share Posted November 3, 2008 Hi Guys, Did you tryied it out with a JFL92 model? According to the Compal´s support site, those models (IFT0X, IFL9X and JFL9X) use the same BIOS. Where did you get it? Is this 1.19 BIOS release a modded BIOS? Quote Link to comment Share on other sites More sharing options...
Guest Guest Posted November 4, 2008 Report Share Posted November 4, 2008 On 1.19 works hyper-v on 2008 server but very sloooooooow... :-( it isn't good bios... Quote Link to comment Share on other sites More sharing options...
Nicram Posted November 7, 2008 Author Report Share Posted November 7, 2008 Some guy that work on BIOS for Compal send it to someone, & that person distribute it on rapidshare. AFAIK this BIOS is not final release so yes, VT may not work as it should & yes, DEP is enabled. Yes it should work fine with JFL92. Quote Link to comment Share on other sites More sharing options...
Guilherme Françoso Posted November 7, 2008 Report Share Posted November 7, 2008 Thanks for you answer... Is great to know that someone keeps improving tho XFL9X... It is a great machine. So... Is there any predictions about on when this BIOS is going to be released? Hope it gets ready soon... Quote Link to comment Share on other sites More sharing options...
Nicram Posted November 9, 2008 Author Report Share Posted November 9, 2008 Noone knows it :) Quote Link to comment Share on other sites More sharing options...
blueicePT Posted November 23, 2008 Report Share Posted November 23, 2008 I'm new in this.. If i update my compal FL90 Bios to v1.19, what diference that will make in my laptop? Quote Link to comment Share on other sites More sharing options...
DarkKiller Posted November 26, 2008 Report Share Posted November 26, 2008 Nice :) Does 1.19 have any particular bugs I should know of? I would much rather have a stable BIOS than something alpha/prerelease/unstable. Quote Link to comment Share on other sites More sharing options...
Nicram Posted November 27, 2008 Author Report Share Posted November 27, 2008 AFAIK there is some problem with VT with this BIOS (ppl say that is working very slow on 1.19), so i think most stable is 1.18. @blueicePT: it depend from what version You will ugprade, every release got changelog that You may find in the BIOS .zip file downloaded from compal webiste. Quote Link to comment Share on other sites More sharing options...
Guest Guest Posted November 30, 2008 Report Share Posted November 30, 2008 I've flashed my bios to 1.18 but now my computer wont fully boot. when it gets to the windows bootscreen, the green bar doesnt even move, then a bluee screen appears and then it reboots. Did i brick it? is there any way to recover? Quote Link to comment Share on other sites More sharing options...
Tomcheck Posted November 30, 2008 Report Share Posted November 30, 2008 that problem was already discussed in this thread. (http://forums.laptopvideo2go.com/index.php?showtopic=15104&view=findpost&p=89001) Just disable "AHCI" in your BIOS menu under "Advanced". Quote Link to comment Share on other sites More sharing options...
Guest Del4ev Posted December 1, 2008 Report Share Posted December 1, 2008 Hi all i has a problem to update bios (Ver 1.03A) on my JFT00 First of all, i cant find this model on official site, but IFT00 should be same (i believe) 12", intel 965 chipset When i trying update bios i always get error "COULD NOT FIND BCP DMI block in bios rom" or (if i remove /mode=3 from command line) it just halt. i have no idea what to do. Help please Quote Link to comment Share on other sites More sharing options...
Guest Del4ev Posted December 2, 2008 Report Share Posted December 2, 2008 Ooo sorry , i solve my problem. IFT00 not the same JFT00! JFT00 has InsydeH20 bios, but i was tryid update Phoenix bios. Thanks god, this not damage my laptop. But it very strange, that JFT00 is in products on official site, but is`t in dowload/bios. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.