Version 6.10.6263.0 DriverVer=12/15/2009,6.10.6263.0 Vista/Windows 7 x32/x64
Version 6.10.6255.0 DriverVer=11/06/2009,6.10.0.6255 Vista/Windows 7 x32/x64
Version 6.10.6233.0 DriverVer=08/26/2009,6.10.0.6233 Vista/Windows 7 x32/x64
Version 6.10.6187.0 DriverVer=04/09/2009,6.10.0.6187 Vista/Windows 7 x32/x64
Version 6.10.20001.0 DriverVer=03/012/2009,6.10.0.20001 Vista/Windows 7 x32/x64
Version 6.10.6162.3 DriverVer=03/06/2009,6.10.0.6162 Vista/Windows 7 x32/x64
Version 6.10.6162.0 DriverVer=03/02/2009,6.10.6162.0 Vista/Windows 7 x32/x64
Version 6.10.6159.0 DriverVer=02/23/2009,6.10.6159.0 Vista/Windows 7 x32/x64
Quote
=============================================================
Un-installation instructions
============================
If upgrading from previous IDT or SigmaTel driver, uninstall the original driver before running setup.
+To uninstall in Windows XP 32 and 64:
--------------------------------------
Go to "Start", "Control Panel", "Add or Remove Programs", select IDT and/or Sigmatel driver and "Remove".
+To uninstall in Windows Vista 32 and 64:
-----------------------------------------
Go to "Start", "Control Panel", "Programs and Features", select IDT and/or Sigmatel driver and "Uninstall".
Installation of new driver
==========================
(Typical user) To install using the Wizard, run setup.exe from the DISK1 folder, reboot if required.
+(Advanced user) INF installation with Windows XP:
--------------------------------------------------
1. Go to "Control Panel", "System", Hardware tab - "Device Manager", under Sound, video and game controllers, right-click High Definition Audio CODEC and select "Update Driver..."
2. Choose "Install from a list or specific location (Advanced)" and choose "Next".
3. Check the box "Include this location in the search:" and browse to DISK1\WDM\WinXP folder from the driver package and choose "Next".
4. XP will now install the audio driver from the INF file.
+(Advanced user) INF installation with Windows Vista:
-----------------------------------------------------
1. Go to "Control Panel", "System", "Device Manager" on the left side, under Sound, video and game controllers, right-click High Definition Audio CODEC and select "Update Driver Software".
2. Select "Browse my computer for driver software".
3. Navigate to the WDM folder located in the DISK1 folder and choose "Next". 4. Vista will now install the audio driver from the INF file.
Thanks,
IDT PC Audio Team
What may need to happen is in future release you may need to add a certain 'Pin' section to the INI.
This section in all INI but is device/model specific.
This tells the driver what is attached to the machine, ie Speakers, Speaker/HP combined, lineout, linein, SPDIF, HDMI, MICs etc etc
I have left this section blank hoping the driver would detect what was where.
What you will need to do is to find the original driver's INI file (WRTxxxxx.ini)
You will need to do a PCI_ID AND SUBSYS search for the exact INI. (the one below is for Dell i9400 and possibly others)
In this INI will be a section like this:
Quote
[HKR\Settings\Pin\08]
CfgDflt = dword: 0x40C003FA
[HKR\Settings\Pin\09]
CfgDflt = dword: 0x01441340
[HKR\Settings\Pin\10]
CfgDflt = dword: 0x04A11020
Bias = hex: FF,04,02
AltCfg = hex: 20,10,81,04
[HKR\Settings\Pin\11]
CfgDflt = dword: 0x90170310
[HKR\Settings\Pin\12]
CfgDflt = dword: 0x40F003FC
[HKR\Settings\Pin\0D]
CfgDflt = dword: 0x0421121F
Action = hex: 81,0E
[HKR\Settings\Pin\0E]
CfgDflt = dword: 0x90170310
[HKR\Settings\Pin\0F]
CfgDflt = dword: 0x408003FB
Use a Text editor (like WOrdpad etc) to open both INI's (original OEM INI and my Modded one)
Copy and Paste the ORIGINAL section to the Modded INI between [HKR\Settings\GPIO] and [HKR\Settings\Connselector] or below [HKR\Settings\pin]
Save the newly modded INI.
Unistall the current driver USING control panels Uninstall (very important)
Now just run setup and hopefully the Audio/jacks will function as they should.
Please report back here if it does or doesn't
INF v1.001, WRT.ini v1.001
Initial release, driver based on MSUpdate release of 6159.
To do:
Enable Andrea Spatial/Directional Microphone features.
Equaliser integration in to Windows Sound Control panel.
INF v1.001, WRT.ini v1.002
Fixed Coinstaller on 6162.0 and 6162.3 (now used correct version)
INF v1.001, WRT.ini v1.004
Added Andrea Sound Processing
WRT.ini v1.005 Download this INI replace the older modded INI with this one.
Uninstall old drover then reinstall driver again (not doing this will not make changes)
Added
* Jack configuration
* Speaker Configuration now has Stereo, 3.1, Quadrophonic, 5.1 and 7.1
Some cosmetic changes
WRT.ini v1.006 Alpha Download this INI replace the older modded INI with this one.
Uninstall old drover then reinstall driver again (not doing this will not make changes)
This is a stipped back INI file to test if this is the cause of some Audio Chipsets not installing, please report back if this version works or not.
Andrea actually has 2 more features so something to work on with future builds.
WRT.ini v1.007 beta
Rebuilt INI
Added Beam forming to Andrea (missing from v1.004
Preference Page now has all known settings (Thanks to Chris)
I am much happier with this INI, and should be almost a final one.
Any one that can enable the hidden Doldy Pages, let me know.
WRT.ini v1.008 beta
Fixed 32bit Installer tweaks, 32bit OS's should reinstall with this version.
Lots of cosmetic changes.
No other changes.
INF v1.003, INI v1.010
Remade INI from 20001 versions and them also remade INF to enable features.
20001 does not seem tot support SRS, so this has no support for it .
Windows Sound control now has lots of options to play with including Dolby.
Links are in the above.
INF v1.004, INI v1.013
Adjusted INI to work with 6187
Added huge SRS section.
INF got Equalizer added from 20001 as to make the INI more manageable.
Windows Audio now has MonoMix feature added to volume page
INF v1.005, INI v1.018
New Control Panel is now default when clicking on icon in taskbar.
Reverting back to original INF setting from 6187
INF v1.006, INI v1.018
Going back to 1004 INF, this INF has the Windows Audio control support features
INF v1.006, INI v1.019
Removed \Filters\ section to help with installs of other OEM notebooks and allow easy replace of original sections
INF v1.009, INI v1.031 Applies only 8187
This is a Inspiron 9400/E1705 version of the INI, should work with other STAC9200 Notebooks.
Enabled the very elusive Subwoofer volume slider
Enabled the Minipanel (EQ) page
Reverted back to original Control Panel
Lots of other small changes, pretty well everything under the sun has been enabled that I know of.
INF v1.010, INI v1.031 Applies only 8187
Fixed tiny typo in x32 INF
For other IDT/ST owners you still need to replace the sections mentioned above for this driver to work.
Only i9400 owners get a free ride
Below are the pages features I can get (a selection, I can sometime get more with testing)
Sign In
Register
Help
Start a new topic
Add Reply





MultiQuote



