1 reply to this topic

[neilg]

Hello all
I am having a problem re-flashing the video card to the backup bios I took. I used nvflash 5.95 and created a log. Any help will be appreciated. Thanks

*** NVFLASH LOG FILE ***
Version 5.95


Command: flash
FindDevices:
Device:00:00:00=8086:2A00:1028:01F7
Device:00:01:00=8086:2A01:1028:01F7
Device:00:1A:00=8086:2834:1028:01F7
Device:00:1A:01=8086:2835:1028:01F7
Device:00:1B:00=8086:284B:1028:01F7
Device:00:1C:00=8086:283F:1028:01F7
Device:00:1C:01=8086:2841:1028:01F7
Device:00:1C:03=8086:2845:1028:01F7
Device:00:1C:04=8086:2847:1028:01F7
Device:00:1C:05=8086:2849:1028:01F7
Device:00:1D:00=8086:2830:1028:01F7
Device:00:1D:01=8086:2831:1028:01F7
Device:00:1E:00=8086:2448:1028:01F7
Device:00:1F:00=8086:2811:1028:01F7
Device:00:1F:01=8086:2850:1028:01F7
Device:01:00:00=10DE:01B3:FFFF:FFFF BRIDGE
Device:02:00:00=10DE:01B3:FFFF:FFFF BRIDGE
Device:02:01:00=10DE:01B3:FFFF:FFFF BRIDGE
Device:03:00:00=10DE:0409:161F:2052 GPU
Device:05:01:00=1180:0832:1028:01F7
Device:05:01:01=1180:0822:1028:01F7
Device:05:01:02=1180:0843:1028:01F7
Device:05:01:03=1180:0592:1028:01F7
Device:05:01:04=1180:0852:1028:01F7
Device:09:00:00=14E4:1672:1028:01F7
Device:0C:00:00=8086:4229:8086:1100
Device:0F:00:00=1971:0000:105B:0003
One to one mode
Testing adapter: GeForce 8700M GT (10DE,0409,161F,2052) H:02:SP0 B:03,PCI,D:00,F:00
Action: Override subvendor strap.
Original NV_PEXTDEV_BOOT_0: 0x8F44A48A
New NV_PEXTDEV_BOOT_0: 0x8F44A48A
Action: Read image head.
Action: Identify EEPROM.
Atmel Serial EEPROM Identify.
Reported Manufacturer Code (JEDEC): 00
Reported Device Code (JEDEC): 0000
Reported Manufacturer Code (SST): 00
Reported Device Code (SST): 00
Reported Manufacturer Code (Atmel): 1F
Reported Device Code (Atmel): 60
EEPROM ID (1F,0060) : Atmel AT25F1024 2.7-3.6V 1024Kx1S, page
Action: Read EEPROM image.
Reading EEPROM bytes.
Start: 0x00000000
Count: 1024
Read complete.
Testing Image: backup.rom
Mismatch Type: Computed: 0x0000000E
WARNING: Firmware image PCI Subsystem ID (1028.019C)
does not match adapter PCI Subsystem ID (161F.2052).
WARNING: Firmware image Board ID (8434) does not match adapter Board ID (841C).
Overriding PCI subsystem ID mismatch

ERROR: Update aborted
Exit Code: 2