Jump to content
LaptopVideo2Go Forums

LSI SAS controller stuff


mobilenvidia

Recommended Posts

Below is a list of all known LSI SAS devices from the SAS1068 chipset to the very latest not yet publicly available SAS3xxx series.

Devices with links have been released and official website technical info/support.

Quite a few devices with no links are devices that may have been going to be released, are going to be released or just devices that never made it to production, but they are listed all the same.

I have where applicable written which devices are cross flashable to other devices of the same chipset.

If you have a controller and have successfully cross flashed or done something worthy, reply back here and the list will be updated.

If you find mistakes reply back.

If you know of other devices that we've missed reply back

If you find official webpages for devices listed but not linked reply back.

Key

4i = 1x internal 4 port SAS connector (SFF-8087)

8i = 2x internal 4 port SAS connectors (SFF-8087)

8e= 2x external 4 port SAS connector (SFF-8088)

24i4e = 6x internal 4 port SAS connector (SFF-8087) AND 1x external 4 port SAS connector (SFF-8088)

There are other combinations, but you get the idea :)

Some devices have SATA ports, ie a 4i device could mean 4x SATA connectors (these are rare)

Some devices have quite a few options when it comes to BBU's, these are optional extras, check website specs for options.

Some OEM devices look cheaper then their LSI counterparts (ie IBM ServeRAID M1015 vs LSI9240) this is due to the M1015 lacking RAID 5/50 and drive encryption.

IBM has a 'Advanced feature key' to enable the missing functions, these need to be purchased separately.

Be warned that the Software keys are NOT interchangeable between OEMs and LSI !!

Hope this is of use.

Older SAS controllers

LSI1064 - 4x SAS 1.0 = 973MB/s, PCIe v1.0 4x, 858MB/s max throughput

LSI1068 - 8x SAS 1.0 = 1945MB/s, PCIe v1.0 4x, 858MB/s max throughput

LSI1078 - DDR2 667Mhz, 8x SAS 1.0 = 1945MB/s, PCIe v1.0 4x, 858MB/s max throughput

LSI MegaRAID

SAS1068

  • LSI Logic MegaRAID SAS 8408E RAID Controller
  • LSI Logic MegaRAID SAS 8480E RAID Controller
  • LSI Logic MegaRAID SAS 8344ELP RAID Controller
  • LSI Logic MegaRAID SAS 8308ELP RAID Controller
  • LSI Logic MegaRAID SATA 300-4ELP RAID Controller
  • LSI Logic MegaRAID SATA 300-12E RAID Controller
  • LSI Logic MegaRAID SATA 300-16E RAID Controller
  • LSI Logic MegaRAID SAS 84016E RAID Controller
  • LSI Logic MegaRAID SATA 300-8ELP RAID Controller
  • LSI Logic MegaRAID SAS 8300XLP RAID Controller

SAS1068e, e=PCIe, x = PCI-X, 3Gbps HBA controller chipset

  • LSI SAS 3081E-R 2x4 port internal SAS horizontal RAID 0, 1, 1E and 10E, no cache, no BBU
  • LSI SAS 3801E 2x4 port external, no cache, no BBU
  • LSI SAS 3442E-R 1x4 port internal SAS horizontal RAID 0, 1, 1E, 10E and no RAID, no cache, no BBU, internal SFF8484, external SFF8470 ports
  • LSI SAS 3041E-R 4x1 port internal SATA vertical RAID 0, 1, 1E, 10E and no RAID, no cache, no BBU
  • LSI SAS 3080X-R 8x1 port internal SATA vertical RAID 0, 1, 1E, 10E and no RAID, PCI-X interface
  • LSI SAS 3801X 2x4 port external, no cache, no BBU,RAID 0, 1, 1E, 10E and no RAID, PCI-X interface
  • LSI SAS 3442X-R 1x4 port internal SAS horizontal RAID 0, 1, 1E, 10E and no RAID, no cache, no BBU, internal, SFF8484, external SFF8470 ports
  • LSI SAS 3041X-R 4x1 port internal SATA vertical RAID 0, 1, 1E, 10E and no RAID, no cache, no BBU, PCI-X interface
  • LSI SAS 31601E 4x4 port external, no cache, no BBU, RAID 0, 1, 1E, 10E and no RAID, dual LSI1068 controllers

SAS1078

Dell PercRAID

sas1078

  • Perc 6/E 2x 4 wide port External SAS, RAID 0, 1, 5, 6, 10, 50, 60, 256MB or 512MB DDR II cache, BBU capable
  • Perc 6/i Adaptor 2x 4 wide port inernal SAS, RAID 0, 1, 5, 6, 10, 50, 60, No cache or 256MB DDR II cache, BBU capable
  • Perc 6/i Integrated 2x 4 wide port inernal SAS, RAID 0, 1, 5, 6, 10, 50, 60, 256MB DDR II cache, BBU capable
  • Cerc 6i integrated 1x 4 wide port inernal SAS, RAID 0, 1, 5, 6, 10, 50, 60, No cache, No BBU

IBM ServeRAID

SAS1078

  • ServeRAID-MR10i SAS/SATA Controller
  • ServeRAID-MR10il SAS/SATA Controller
  • ServeRAID-MR10M SAS/SATA Controller
  • ServeRAID-MR10k SAS/SATA Controller
  • ServeRAID-MR10is SAS/SATA Controller
  • ServeRAID-MR10ie SAS/SATA Controller

Fujitsu

sas1068e

  • S26361-F3271-E201 1x4 port internal, 1x4 port external, LSI SAS3442E-R

SAS1078

  • RAID 5/6 SAS based on LSI MegaRAID (MegaRAID SAS 8708ELP)
  • S26361-F3257-E256 2x4 port internal, 256MB BBU capable
  • S26361-F3257-E512 2x4 port internal, 512MB BBU capable
  • S26361-F3890-E201 2x 4port external no BBU, MegaRAID SAS 8880E
  • S26361-F3890-E230 2x4 port external with BBU, MegaRAID SAS 8880E

HP Smart Array

sas1078

  • HP Smart Array P400 2x 4port internal SAS (SFF8484) vertical, 256MB or 512MB DDRII BBWC, RAID 0, 1, 10, 5 and optional 6 (with BBWC)
  • HP Smart Array P800 2x 4port internal and 2x 4 port external SAS, 512MB DDRII BBWC, RAID 0, 1, 10, 5 and 6 (with BBWC)

Intel

SAS1068 with Intel 80333 IOP

SAS1068e HBA controllers

SAS1078

Tyan Adapters

SAS1068E

SAS1078

  • Tyan P3214 (P3214EHR) 1x 4port internal SAS vertical, low profile, 256MB 667Mhz DDRII Cache, RAID 0, 1, 5, 6, 10, (50, 60 with expander ?)
  • Tyan P3218 (P3218EHR) 2x 4port internal SAS vertical, low profile, 256MB 667Mhz DDRII Cache, RAID 0, 1, 5, 6, 10, 50, 60
  • Tyan P3219 (P3219EHRX) 2x 4port internal horizontal and 2x 4port external SAS, 512MB 667Mhz DDRII Cache, RAID 0, 1, 5, 6, 10, 50, 60
  • Tyan P3228 (P3228EHR) 4x 4 port internal SAS horizontal, full height, 256MB 667Mhz DDRII Cache, RAID 0, 1, 5, 6, 10, 50, 60

Tyan Motherboards

SAS1068E

SuperMicro Adapters

SAS1068E

  • AOC-USAS-L4i 1x 4port internal and 1x 4port external SAS, full height, no BBU, RAID 0, 1 and 10
  • AOC-USAS-L4iR 1x 4port internal and 1x 4port external SAS, full height, no BBU, RAID 0, 1, 10 and 5 (with i button)
  • AOC-USAS-L8i 2x 4port internal SAS horizontal, full height, no BBU, RAID 0, 1 and 1E also IT mode available
  • AOC-USASLP-L8i 2x 4port internal SAS horizontal, low profile, no BBU, RAID 0, 1 and 10

SAS1078

  • AOC-USAS-H8iR 2x 4port internal SAS horizontal, full height, 256MB DDRII cache, BBU capable, RAID 0, 1, 5, 6, 10, 50, 60 (with ibutton)
  • AOC-USAS-H4iR 1x 4port internal and 1x 4port external SAS, full height, 256MB DDRII cache, BBU capable, RAID 0, 1, 5, 6, 10, 50, 60 (with ibutton)
  • AOC-USASLP-H8iR 2x 4port internal SAS horizontal, low profile, 512MB DDRII cache, BBU capable, RAID 0, 1, 5, 6, 10, 50, 60 (with ibutton)

SuperMicro Motherboards

SAS1068E

  • X8DT3-LN4F 2x4 ports SAS internal, RAID 0, 1, and 10, no cache, no BBU, (Optional: AOC-IButton68) RAID 5 support
  • X8DT3-F 2x4 ports SAS internal, RAID 0, 1, and 10, no cache, no BBU, (Optional: AOC-IButton68) RAID 5 support
  • X8DT3 2x4 ports SAS internal, RAID 0, 1, and 10, no cache, no BBU, (Optional: AOC-IButton68) RAID 5 support
  • X8DA3 2x4 ports SAS internal, RAID 0, 1, and 10, no cache, no BBU, (Optional: AOC-IButton68) RAID 5 support
  • X8DTL-3F 2x4 ports SAS internal, RAID 0, 1, and 10, no cache, no BBU, (Optional: AOC-IButton68) RAID 5 support
  • X8DTL-3 2x4 ports SAS internal, RAID 0, 1, and 10, no cache, no BBU, (Optional: AOC-IButton68) RAID 5 support
  • X8DAL-3 2x4 ports SAS internal, RAID 0, 1, and 10, no cache, no BBU, (Optional: AOC-IButton68) RAID 5 support

Misc Adapters, these are unkown controllers

  • MS-91F2 RAID Controller
  • MS-3035 RAID Controller
  • Intel® Integrated RAID Controller SROMBSASFC
  • Intel® Integrated RAID Controller SROMBSASMP2
  • Intel® Integrated RAID Controller SROMBSASMR
  • Intel® RAID Controller SROMBSASBN
  • LSI Logic MegaRAID SAS PCI Express ROMB
  • LSI MRSASRoMB-8i
  • LSI MegaRAID SAS 2002 ROMB
  • LSI MegaRAID SAS Adapter
  • LSI MegaRAID SAS PCI Express ROMB
  • PY SAS RAID Mezz Card 6Gb 512MB
  • SMC1078
  • SMC2208

Link to comment
Share on other sites

SAS2008 based controllers

SAS2008 - 8x SAS v2.0, 3890MB/s, PCIe v2.0, PCIe 4x slot 1716MB/s, PCIe 8x slot 3433MB/s max throughput

INTEGRATED RAID FEATURES

  • Supported RAID levels RAID 0, 1, 1E and 10
  • Two volumes supported per controller
  • 12 Integrated RAID drives supported per controller
  • Two hot spares per controller
  • Single virtual drive presented to the OS per IR volume
  • Ability to boot from aIR volume
  • Supports SAS and SATA drives
  • Drives ia volume must be the same type
  • > 2 TB array support for R0, 1E, 10
  • RAID 1 Online capacity expansion
  • Consistency check
  • Allows import of volumes created on LSI’s first generatioSAS controllers and maintains legacy data layouts
  • High reliability and data integrity
  • Non-volatile write journaling
  • Physical disks not volatile to OS or to application software
  • Hot swap capability
  • Disk Data Format (DDF) compliant
  • S.M.A.R.T. support
  • Enclosure Management
  • LED via SGPIO
  • Additional connectivity such as tape, JBOD or external storage
  • High performance
  • Low host CPU and PCI bus utilization
  • Ease of use Simple configuration utility
  • No special drivers required
  • Fusion-MPT™ architected
  • Memory Requirements
  • 4MB flash part for IR code
  • 2KB NVSRAM for write journaling and other read/write persistent data

LSI MegaRAID and SAS (HBA)

  • LSI SAS 9200-8e 2x4 ports SAS external, no cache, no BBU, IT mode only firmware, might be cross flashable to a LSI9240
  • LSI SAS 9201-16i 4x4 ports SAS internal horizontal, no cache, no BBU might be cross flashable to a LSI9240 but with 16 ports
  • LSI SAS 9201-16e 4x4 ports SAS external, no cache, no BBU might be cross flashable to a LSI9240 but with 16 ports
  • LSI SAS 9202-16e 4x4 ports SAS external, no cache, no BBU might be cross flashable to a LSI9240 but with 16 ports, this is a dual SAS2008 card with PCIe 16x interface
  • LSI SAS 9210-8i 2x4 port internal SAS horizontal, no cache, no BBU, OEM version of LSI9211-8i, , can flashed to IT or IR mode possibly even to LSI9240
  • LSI SAS 9211-4i 1x4 port internal SAS horizontal, no cache, no BBU, can flashed to IT or IR mode possibly even to LSI9240
  • LSI SAS 9211-8i 2x4 port internal SAS horizontal, no cache, no BBU, can flashed to IT or IR mode possibly even to LSI9240
  • LSI SAS 9212-4i4e 4x1 port internal vertical SATA ports and 1x4 Port external SAS, no cache, no BBU, can flashed to IT or IR mode possibly even to LSI9240
  • LSI MegaRAID SAS 9240-4i 1x4 port internal SAS vertical, no cache, no BBU, RAID 0, 1, 10 and 5, can be crossflashed to LSI9211 IT/IR
  • LSI MegaRAID SAS 9240-8i 2x4 port internal SAS vertical, no cache, no BBU, RAID 0, 1, 10, 5 and 50, can be crossflashed to LSI9211 IT/IR
  • LSI MegaRAID SAS 9241-4i
  • LSI MegaRAID SAS 9241-8i

IBM ServeRAID

Dell Perc RAID

  • Dell 6Gbps SAS HBA 2x4 port internal SAS Horizontal, no cache, no BBU, Passthrough only, similar to LSI9211 IT mode
  • Dell PERC H200 Adapter 2x4 port internal SAS Horizontal, no cache, no BBU, RAID 0, 1 and 10, similar to LSI9211 IR mode
  • Dell PERC H200 Integrated 2x4 port internal SAS Horizontal, no cache, no BBU, RAID 0, 1 and 10, similar to LSI9211 IR mode
  • Dell PERC H200 Modular
  • Dell PERC H200 Embedded
  • Dell PERC H200 2x4 port internal SAS Horizontal, no cache, no BBU, RAID 0, 1 and 10, similar to LSI9211 IR mode
  • Dell Internal Tape Adapter
  • PERC H310
  • PERC H310 Adapter 2x4 port internal SAS vertical ?, no cache, no BBU, RAID 0, 1, 10, 5 and 50 should be able to cross flash to LSI9211 IT/IR and LSI9240, NOT tested
  • PERC H310 Integrated
  • PERC H310 Mini
  • PERC H310 Embedded

HP

  • HP H220 Host Bus Adapter
  • HP H221 Host Bus Adapter
  • HP H222 Host Bus Adapter
  • HP H220i Host Bus Adapter
  • HP H210i Host Bus Adapter

Fujitsu

  • RAID Ctrl SAS 6G 0/1 (D2607) 2x4 port SAS horizontal, no cache, no BBU, should be able to be cross flashed to LSI9211 IT/IR mode, RAID 0,1 and 10

Supermicro

  • Supermicro SMC2008 Embedded on motherboard

Cisco

  • Cisco UCSC RAID SAS 2008M-8i

Intel

Tyan Motherboards

Supermicro Motherboards

  • X8DTH-6F 2x4 port internal SAS, no cache, no BBU, RAID 0, 1 and 10,Optional: AOC-SAS2-RAID5-KEY for RAID 5
  • X8DTH-6 2x4 port internal SAS, no cache, no BBU, RAID 0, 1 and 10,Optional: AOC-SAS2-RAID5-KEY for RAID 5
  • X8DT6 2x4 port internal SAS, no cache, no BBU, RAID 0, 1 and 10,Optional: AOC-SAS2-RAID5-KEY for RAID 5
  • X8DA6 2x4 port internal SAS, no cache, no BBU, RAID 0, 1 and 10,Optional: AOC-SAS2-RAID5-KEY for RAID 5
  • X8DTL-6F 2x4 port internal SAS, no cache, no BBU, RAID 0, 1 and 10,Optional: AOC-SAS2-RAID5-KEY for RAID 5
  • X8DTL-6 2x4 port internal SAS, no cache, no BBU, RAID 0, 1 and 10,Optional: AOC-SAS2-RAID5-KEY for RAID 5

Gigabyte Motherboards

  • GA-7PESH2 2x4 port internal SAS, vertical, no cache, no BBU, RAID ?
  • GA-7PESH1 2x4 port internal SAS, vertical, no cache, no BBU, RAID ?
  • GA-7PESLX 2x4 port internal SAS, vertical, no cache, no BBU, RAID ?

Link to comment
Share on other sites

SAS2108 based controllers

SAS2108 - DDR2 800Mhz, 8xSAS v2.0 3890MB/s, PCIe v2.0, PCIe 4x slot 1716MB/s, PCIe 8x slot 3433MB/s max throughput

LSI MegaRAID

  • LSI MegaRAID SAS 9260-16i 4x4 port internal SAS vertical, 512MB DDR2 cache, BBU capable RAID 0, 1, 10, 5, 6, 50 and 60
  • LSI MegaRAID SAS 9260-4i 1x4 port internal SAS vertical, 512MB DDR2 cache, BBU capable RAID 0, 1, 10, 5, 6 and 50
  • LSI MegaRAID SAS 9260-4ix
  • LSI MegaRAID SAS 9260-8i 2x4 port internal SAS vertical, 512MB DDR2 cache, BBU capable RAID 0, 1, 10, 5, 6, 50 and 60
  • LSI MegaRAID SAS 9260-8ix
  • LSI MegaRAID SAS 9260CV-4i 1x4 port internal SAS vertical, 512MB DDR2 cache, BBU capable RAID 0, 1, 10, 5 and 50 with CacheVault
  • LSI MegaRAID SAS 9260CV-8i 2x4 port internal SAS vertical, 512MB DDR2 cache, BBU capable RAID 0, 1, 10, 5, 6, 50 and 60 with CacheVault
  • LSI MegaRAID SAS 9261-8i 2x4 port internal SAS horizontal, 512MB DDR2 cache, BBU capable RAID 0, 1, 10, 5, 6, 50 and 60
  • LSI MegaRAID SAS 9262-8i
  • LSI MegaRAID SAS 9264-8i
  • LSI MegaRAID SAS 9280-16i4e 4x4 ports internal SAS vertical, 1x4 ports SAS external, 512MB DDR2 cache, BBU capable RAID 0, 1, 10, 5, 6, 50 and 60
  • LSI MegaRAID SAS 9280-24i4e 6x4 ports internal SAS and 1x4 ports SAS external, 512MB DDR2 cache, BBU capable RAID 0, 1, 10, 5, 6, 50 and 60
  • LSI MegaRAID SAS 9280-4i4e 1x4 ports internal SAS vertical and 1x4 ports SAS external, 512MB DDR2 cache, BBU capable RAID 0, 1, 10, 5, 6, 50 and 60
  • LSI MegaRAID SAS 9280-8e 2x4 ports external SAS, 512MB DDR2 cache, BBU capable RAID 0, 1, 10, 5, 6, 50 and 60
  • LSI MegaRAID SAS 9280-8ex
  • LSI MegaRAID SAS 9280CV-4i4e
  • LSI MegaRAID SAS 9280CV-8e
  • LSI MegaRAID SAS 9281-8E
  • LSI MegaRAID SAS 9282-8e

IBM ServeRAID

  • ServeRAID M5014 SAS/SATA Controller 2x4 port internal SAS vertical, 256MB cache, RAID 0, 1, 10, 5 and 50, BBU capable, can be cross flashed to LSi9260, need Advanced feature key for RAID 6 and 60 and Drive encryption
  • ServeRAID M5015 SAS/SATA Controller 2x4 port internal SAS vertical 512MB cache, RAID 0, 1, 10, 5 and 50, BBU capable, can be cross flashed to LSi9260, need Advanced feature key for RAID 6 and 60 and Drive encryption.
  • ServeRAID M5025 SAS/SATA Controller 2x4 port external SAS 512MB cache, RAID 0, 1, 10, 5 and 50, BBU capable, can be cross flashed to LSi9280, need Advanced feature key for RAID 6 and 60 and Drive encryption.

Dell Perc RAID

  • PERC H700 2x4 ports internal SAS vertical, 512MB and 1GB DDr2 Non Volatile cache, RAID 0, 1, 10, 5, 6, 50, 60, can be cross flashed to LSI9260, Full height card
  • PERC H700 Adapter 2x4 ports internal SAS vertical, 512MB and 1GB DDr2 Non Volatile cache, RAID 0, 1, 10, 5, 6, 50, 60, can be cross flashed to LSI9260, Full height card
  • PERC H700 Integrated 2x4 ports internal SAS vertical, 512MB and 1GB DDr2 Non Volatile cache, RAID 0, 1, 10, 5, 6, 50, 60, can be cross flashed to LSI9260, Full height card
  • PERC H700 Modular
  • PERC H800 Proto Adapter
  • PERC H800 Adapter 2x4 ports internal SAS vertical, 512MB and 1GB DDr2 Non Volatile cache, RAID 0, 1, 10, 5, 6, 50, 60, can be cross flashed to LSI9280, Full height card

Fujitsu

  • SAS RAID HDD Module (D2816)
  • SAS RAID HDD Module w/o cache (D2837)

Intel

SuperMicro Motherboards

  • X8DTU-6F+-LR 2x4 ports SAS internal, 512MB DDR2 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60
  • X8DTU-6TF+-LR 2x4 ports SAS internal, 512MB DDR2 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60
  • X8DTU-6F+ 2x4 ports SAS internal, 512MB DDR2 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60
  • X8DTU-6TF+ 2x4 ports SAS internal, 512MB DDR2 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60

Link to comment
Share on other sites

SAS2208 based Controllers

LSI MegaRAID

  • LSI MegaRAID SAS 9265-8i 2x4 ports SAS internal vertical, 1GB DDR3 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60
  • LSI MegaRAID SAS 9265CV-8i
  • LSI MegaRAID SAS 9266-4i 1x4 ports SAS internal horizontal, 1GB DDR3 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50
  • LSI MegaRAID SAS 9266-8i 2x4 ports SAS internal vertical, 1GB DDR3 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60
  • LSI MegaRAID SAS 9267-8i
  • LSI MegaRAID SAS 9270-4i
  • LSI MegaRAID SAS 9270-8i
  • LSI MegaRAID SAS 9270CV-8i
  • LSI MegaRAID SAS 9271-8i
  • LSI MegaRAID SAS 9272-8i
  • LSI MegaRAID SAS 9285-8e 2x4 ports SAS external, 1GB DDR3 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60
  • LSI MegaRAID SAS 9285CV-8e 2x4 ports SAS external, 1GB DDR3 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60 with CacheVault
  • LSI MegaRAID SAS 9286-8e As seen in the Fujitsu PRIMERGY RX350 S7 (could this be the LSI RAID Ctrl SAS 6G 8Port ex 1GB) ?)
  • LSI MegaRAID SAS 9286CV-8e As seen in the Fujitsu PRIMERGY RX350 S7 (could this be the Fujitsu RAID Ctrl SAS 6G 1GB (D3116B) ?)

IBM ServeRAID

Dell Perc RAID

  • PERC H710 Adapter 2x4 ports internal SAS vertical ? , 512MB DDR3 cache, RAID 0, 1, 10, 5, 6, 50, 60
  • PERC H710 Integrated
  • PERC H710 Mini
  • PERC H710 Embedded
  • PERC H710P Adapter 2x4 ports internal SAS vertical ? , 1GB DDR3 cache, RAID 0, 1, 10, 5, 6, 50, 60
  • PERC H710P Integrated
  • PERC H710P Mini
  • PERC H810 Adapter 2x4 ports external SAS , 1GB DDR3 cache, RAID 0, 1, 10, 5, 6, 50, 60

HP

  • HP H220 Host Bus Adapter
  • HP H221 Host Bus Adapter
  • HP H222 Host Bus Adapter
  • HP H220i Host Bus Adapter
  • HP H210i Host Bus Adapter

Intel

Supermicro Motherboard

  • X9DRH-7F 2x 4 port internal SAS horizontal, RAID 0, 1, 10, 5, 6, 50, 60
  • X9DRH-7TF 2x 4 port internal SAS horizontal, RAID 0, 1, 10, 5, 6, 50, 60
  • X9QR7-TF+ 2x 4 port internal SAS horizontal, RAID 0, 1, 10, 5, 6, 50, 60
  • X9DR7-TF+ 2x 4 port internal SAS horizontal, RAID 0, 1, 10, 5, 6, 50, 60

Link to comment
Share on other sites

SAS2308 based Controllers

FEATURES

  • Integrated RAID – RAID Levels 0, 1, 1E, and 10
  • Integrated MegaRAID® support available upon request
  • High Performance IOP
  • PowerPC 440 @ 800MHz
  • 6Gb/s SAS Interface
  • 8 port SAS/SATA controller
  • Supports 1.5Gb/s, 3Gb/s, and 6Gb/s SAS and SATA data transfer rates
  • Spread spectrum clocking
  • Supports SSP, SMP, STP and SATA protocols
  • SAS and SATA device support
  • Supports narrow and wide ports
  • T-10 data protection model
  • Optical Support and Advanced Error Reporting (AER)
  • PCI Express hot plug support
  • Supports up to 1,000 devices
  • PCI Express 3.0 Interface
  • Supports x8, x4, x1 PCIe lanes at a transfer rate up to 8.0 GT/s per lane, full duplex
  • Lane and polarity reversal
  • SR-IOV (16 virtual functions)
  • Supports End-to-End CRC (ECRC) and Advanced Error Reporting (AER)
  • PCI Express hot plug support
  • Advanced Power Management support
  • Slumber and Partial power mode support for SAS and SATA devices
  • Programmable SAS link power down
  • Variable PCIe bandwidth negotiation
  • External memory interface support
  • Flash ROM
  • NVSRAM for Integrated Mirroring
  • Communication Interfaces
  • I2C interfaces for enclosure management services
  • UART and Ethernet interface for debug
  • SFF-8485 Compliant, SGPIO
  • JTAG support
  • 837 FPBGA-HP (25mm)

LSI MegaRAID

  • LSI SAS 9205-8e 2x4 ports SAS external, no cache, no BBU, can be flashed to either IT or IR mode, possibly even to LSI9240 making it a dual core version (LSI 9245 which was planned)

Intel

Tyan Motherboards

  • TYAN S7053 (S7053WGM2NR) 2x4 ports SAS internal, RAID 0, 1, 1E 5 and 10, no cache, no BBU
  • TYAN S7053 (S7053WGM4NR) 2x4 ports SAS internal, RAID 0, 1, 1E 5 and 10, no cache, no BBU
  • TYAN S7066 (S7066WGM3NR) 2x4 ports SAS internal, RAID 0, 1, 1E 5 and 10, no cache, no BBU

ASRock Motherboards

  • Extreme11 2x4 ports SAS internal

Supermicro Motherboards

  • X9QR7-JTF - 4x4 ports SAS internal
  • X9DR7-LN4F - 2x 4 port SAS internal

Link to comment
Share on other sites

SAS3008 based controllers

Not yet released, but should be with us soon.

LSI MegaRAID

SAS3008 No cache, no BBU, PCIe 3.0, 12Gbs SAS

  • LSI9340-8i

Link to comment
Share on other sites

SAS3108 based controllers

Not yet released, but should be with us soon.

LSI MegaRAID

SAS3108 2GB 1866Mhz DDR3, PCIe 3.0, 12Gbs SAS, CacheVault

  • LSI MegaRAID SAS 9360-4i
  • LSI MegaRAID SAS 9360-8i
  • LSI MegaRAID SAS 9360-16i
  • LSI MegaRAID SAS 9380-8e
  • LSI MegaRAID SAS 9380-16i4e
  • LSI MegaRAID SAS 9380-24i4e

Link to comment
Share on other sites

Info:

Caching mode for SAS1078, SAS2108, SAS2208, SAS3108 controllers:

SAS1068, SAS2008, SAS2308 and (probably) SAS3008 have no cache hence the below does not apply

Read mode

The "Read mode" parameter can be used to influence cache behavior for read. A maximum of three options "No read ahead", "Read ahead" and "Adaptive" are available. No caching during read takes place in the case of "No read ahead". If a data block is requested, "Read ahead" causes further sequentially following data blocks to be already read from the hard disk to the cache of the controller just in case, and in the hope that they will be called for in subsequent requests. In the case of the "Adaptive" setting the controller itself attempts to determine whether a read-ahead makes sense or not.

Write mode

The setting options of the controller cache that control the handling of write requests are summarized under the term "Write mode". There are three options for setting the write cache: "Write-through", "Write-back" and "Always Write-back (independent of BBU state)". The "Write-through" option ensures that each write request from the controller is only reported back as completed when it has been acknowledged by the hard disk. With the "Write-back" and "Always Write-back" options the requests are cached in the controller cache and they are immediately acknowledged to the application as completed and only transferred to the hard disk later. This procedure enables optimal utilization of controller resources, faster succession of the write requests and therefore higher throughput. Any power failures can be bridged by means of an optional BBU, thus guaranteeing the integrity of the data in the controller cache. The "Always Write-back" option enables the write cache on a permanent basis; it is also used if the battery of the BBU is empty or if no BBU is installed, whereas the "Write-back" option automatically switches to "Write-through" as long as the controller cache is not battery-buffered.

Cache mode

The "Cache mode" parameter, sometimes also referred to as "I/O Cache", influences the behavior of the controller cache during read. The "Direct" option defines that the data to be read is read from the hard disk directly and is also not stored in the controller cache. The alternative "Cached" causes an attempt to first be made to find the data in the controller cache and to satisfy the read request in such a way that the hard disk is accessed beforehand. All the data here is written to the controller cache so as to be available for subsequent read requests.

Disk cache mode

The possible values here are "enabled" and "disabled". In most cases, the enabling of the hard disk cache entails an increase in throughput for write access. If the system is safeguarded by UPS, the enabling of the hard disk cache is recommended for performance reasons.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...