I'm definitely not trying to steal Nautis Awesome work, just repackaging it for all my ASUS UL30/50/80 brothers/sisters out their.
- Install Instructions
- VGA Patch
- Nautis HGMS_N26063_I2020_x64
- DriverSigning and dseo13b
- Latest Power4Gear Hybrid: Z121
It's slightly older yes, but its arguably the most stable for the UL30/80/50. Pretty much everything seems to work. We can
Google Drive: LIVE!
Special Thanks to:
Nautis for Developing such a great hybrid switching driver
Install Instructions (Also Bundled in zip file):
System Prep: Step 1: Disable Automatic Updates 1.) Start Button 2.) Type Windows Update In search bar 3.) Click Change Settings 4.) Choose 3rd Option Down "Check for Updates but let me choose whether to download and install them" Step 2: Disable UAC 1.) Disable UAC [User Account Control] (Can usually be done by typing MSCONFIG in run and going to the Tools tab. You can re-enable it after installing the same way.) Step 3: Remove All Nividia Driver &amp;amp;amp;amp;amp; Power4GearHybrid Step 4: Reboot Now Time to Install: Step 1: Extract the zip file to your desktop Step 2: Run VGA_Patch(Removes Intel Drivers) from **Part1_VGA_Patch** Click on the "silent" or "silent.bat" file to run the VGA Patch Step 3: Install Nautis HGMS_N26063_I2020_x64 Driver from **Part2_HGMS_N26063_I2020_x64 Folder** 1.) Optional But reccomended to select Custom/Advanced Install 2.) And Check perform clean install (make sure all boxes are checked Step 4: Reboot When you reboot youll most likely be stuck at 800x600 or 1024x768, I recommend to switch to the highest resolution available to make it easier to sign the drivers. Step 5: Driver Signing &amp;amp;amp;amp;amp; Test Mode for Unofficial 64bit Drivers 2.) Run the Driver Signature Enforcement Overrider and choose "enable test mode" from the **Part3_DriverSigning_and_TestMode** Folder 3.) Reboot. (You should see Test Mode at the bottom right corner after reboot.) 4.) Run the Driver Signature Enforcement Overrider again and choose "Sign a System File" 5.) In the box type "C:\Windows\System32\drivers\nvlddmkm.sys" and click ok (do not include the quotes.) 6.) Click "Sign a System File" again and this time put "C:\Windows\System32\drivers\igdkmd64.sys" (do not include the quotes.) 6.) Reboot and all should work. Step 6: Install Power4Gear Hybrid from the **Part4_Power4Gear_Hybrid_WIN7_64_Z121** folder Step 7: Enjoy awesome performance for your UL30/50/80
Also for Windows 8 Users:
Also for those of you upgrading to windows 8 with hybrid graphics. You will see that even though the drivers install fine, at boot they will be disabled. Because even after you install unsigned graphics after disabling the need to sign drivers, after a reboot they still need to be signed. To get around this you need to enable test mode PERMANENTLY. So heres how to do it:
To enable testmode (allowing permanent unsigned drivers you need to run command prompt as administrator: How to open command prompt in Windows 8 )
Force Test Mode:
To Turn it on in command prompt run: bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS bcdedit -set TESTSIGNING ON To turn it off again, use these commands: bcdedit -set loadoptions ENABLE_INTEGRITY_CHECKS bcdedit -set TESTSIGNING OFF
Drivers still work just perfectly!
Edited by Namesdontmatter, 06 September 2012 - 08:47 PM.