Jump to content
LaptopVideo2Go Forums

AuthenTec fingerprint - latest drivers


®®®

Recommended Posts

AuthenTec Fingerprint drivers

  • v6.28.11.0, dated 2005-03-10
  • Driver only, use "Have Disk" method to install
  • WHQL
  • Changelog:
    The following describes changes made to the swipe sensor device driver ATSwpDrv.sys for the WHQL release version 6.28.11.0. This list includes changes from the WHQL release version 6.28.9.0 though 6.28.11.0 inclusive.
    - Extended selective suspend sleep time to 14 seconds for AES2501A. This improves processor C3 state times.
    - Added GPO PIDs 2588 to 258F to the INF file.
    - INF changed to remove the installation completed message program ATSwpDrv.dll
    - String in INF file for emulator board (Vid=0x8FF, PID=0xFFFF) changed to "AuthenTec Sensor (Emulator)".
  • Supports the following devices:
    %AES1600REFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_1600
    %AES2500REFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_2500
    %AES2501REFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_2501
    %AES2502REFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_2502
    %AES2503REFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_2503
    %AES2504REFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_2504
    %AES2505REFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_2505
    %AES2506REFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_2506
    %AES2507REFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_2507
    %AES2508REFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_2508
    %AES2509REFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_2509
    %AES250AREFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_250A
    %AES250BREFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_250B
    %AES250CREFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_250C
    %AES250DREFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_250D
    %AES250EREFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_250E
    %AES250FREFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_250F
    %AES2580REFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_2580
    %AES2580REFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_2588
    %AES2580REFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_2589
    %AES2580REFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_258A
    %AES2580REFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_258B
    %AES2580REFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_258C
    %AES2580REFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_258D
    %AES2580REFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_258E
    %AES258FREFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_258F
    %AES2510REFBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_2510
    %AESEMULATORBoard%=ATSwpDrv.Dev, USB\VID_08FF&PID_FFFF
    which is
    AES1600REFBoard="AuthenTec AES1600"
    AES2500REFBoard="AuthenTec AES2501"
    AES2501REFBoard="AuthenTec AES2501"
    AES2502REFBoard="AuthenTec AES2501"
    AES2503REFBoard="AuthenTec AES2501"
    AES2504REFBoard=" AuthenTec AES2501"
    AES2505REFBoard=" AuthenTec AES2501"
    AES2506REFBoard=" AuthenTec AES2501"
    AES2507REFBoard=" AuthenTec AES2501"
    AES2508REFBoard="AuthenTec Inc AES2501"
    AES2509REFBoard="AuthenTec Inc AES2501"
    AES250AREFBoard=" AuthenTec Inc AES2501"
    AES250BREFBoard=" AuthenTec Inc AES2501"
    AES250CREFBoard="AuthenTec Inc. AES2501"
    AES250DREFBoard="AuthenTec Inc. AES2501"
    AES250EREFBoard=" AuthenTec Inc. AES2501"
    AES250FREFBoard=" AuthenTec Inc. AES2501"
    AES2580REFBoard="AuthenTec Inc. AES2501."
    AES2588REFBoard="AuthenTec Inc. AES2501."
    AES2589REFBoard="AuthenTec Inc. AES2501."
    AES258AREFBoard="AuthenTec Inc. AES2501."
    AES258BREFBoard="AuthenTec Inc. AES2501."
    AES258CREFBoard="AuthenTec Inc. AES2501."
    AES258DREFBoard="AuthenTec Inc. AES2501."
    AES258EREFBoard="AuthenTec Inc. AES2501."
    AES258FREFBoard="AuthenTec Inc. AES2501."
    AES2510REFBoard="AuthenTec AES2510"
    AESEMULATORBoard="AuthenTec Sensor (Emulator)"

Download the driver HERE (75kb).

Download the changelog HERE (387kb).

Link to comment
Share on other sites

  • 2 months later...

HERE you can download an updated version from HP.

Changelog:

- Corrects issue where the fingerprint sensor may disappear when resuming from Standby or Hibernation mode.

- Improves power management handling for the fingerprint sensor.

Link to comment
Share on other sites

  • 11 months later...
  • 1 month later...
  • 1 year later...

Drivers:

Notes:

  • The version 8 series does not seem to work with current versions of DigitalPersona Personal (3.1).
  • To use the series 8 drivers with Softex OmniPass 6 on an AES2550 you need to have version 6.0.0.7 or newer.
  • There were some tools included with the driver installation, inter alia:
    • Version 7:
      • a tool for configuring the fingerprint reader (motion sensivity, tap sensivity, repeat delay), to make it possible to use it like a scrollwheel or a trackball (did not work for me though), adjust it's orientation, activate logging or to activate a "Anti Spoofing" function (trueprint.exe / trueprint64.exe).

      [*]Version 8:

      • a program to be ran as a service to avoid UAC (ATService.exe) probably used by other applications
      • a tool for using the fingerprint reader as a scrollwheel and adjust it's positioning (TrueprintPanel.exe / TrueprintPanel64.exe).

    I didn't include these files, but if you are interested in them, just let me know.

Have fun!

Edited by dhoon
Link to comment
Share on other sites

  • 4 weeks later...

There is a 8.1.2.37 (2008-10-02) and probably a 8.2.0.155 version floating somewhere around the net.

BTW:

Authentec 7.11.0.10 (2008-08-07)

Edited by dhoon
Link to comment
Share on other sites

  • 1 month later...
  • 4 weeks later...
  • 1 month later...
  • 2 weeks later...
Guest Guest
Anyone was able to download the Windows 7 version of the tools mentioned above? I am looking for a mirror of the 64bits version of these drivers.

try again the above link it works now

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...