Jump to content
LaptopVideo2Go Forums
Sign in to follow this  
GovtMule

Averatec/TriGem D1002UHCE-1 22" AIO PC and 8600M GT

Recommended Posts

GovtMule

I have an Averatec D1002UHCE-1 AIO PC with an MXM type II slot. I just bought an ASUS 8600M GT 256MB GDDR3 type II card to go in. Will this work. I know the board in my system is produced by ECS.

Thanks.

Share this post


Link to post
Share on other sites
Andrew55

Have never heard of that model before but since you say that it has a mxm type 2 slot then the card shouldn't have any problem being installed.

Share this post


Link to post
Share on other sites
GovtMule

So there should be no troubles with bios or anything?

EDIT

Just cancelled 8600m GT .... think I am gonna order the ATI 3650 instead due to the reading I have done on this and other forums. Will this card also work? Will I have to change bios' or anything like that? And what sort of drivers do I use... from ATI or otherwise?

thanks so much... I know nothing about any of this and am tryin to learn.

Edited by GovtMule

Share this post


Link to post
Share on other sites
Guest SaM
So there should be no troubles with bios or anything?

EDIT

Just cancelled 8600m GT .... think I am gonna order the ATI 3650 instead due to the reading I have done on this and other forums. Will this card also work? Will I have to change bios' or anything like that? And what sort of drivers do I use... from ATI or otherwise?

thanks so much... I know nothing about any of this and am tryin to learn.

After reading your reviews on other website I bought Averatec AIO ,let me know your progress with new video card

Share this post


Link to post
Share on other sites
350zrb

I also have Averatec D1002UHCE-1 with 8400M GS (256MB).

I tried 8600M GS (512MB), PC boots OK but screen is blank (black).

I can hear Windows Vista sound at boot, HD light is blinking.

So I put 8400M GS back in.

Now I don't know what other MXM II model I should try.

Any suggestion, anyone?

Thanks

PS. I have 8600M GS (512MB) for sale.

Share this post


Link to post
Share on other sites
Guest Guest
I also have Averatec D1002UHCE-1 with 8400M GS (256MB).

I tried 8600M GS (512MB), PC boots OK but screen is blank (black).

I can hear Windows Vista sound at boot, HD light is blinking.

So I put 8400M GS back in.

Now I don't know what other MXM II model I should try.

Any suggestion, anyone?

Thanks

PS. I have 8600M GS (512MB) for sale.

Did you see anything at all at boot up screen? Like Averatec logo and message at the bottom of screen to press del to enter CMOS setup?

After installing did you go to CMOS set up to see whether BIOS detected new hardware??

If either didn't work thats a really major set back.I'm still exploring for options.

Share this post


Link to post
Share on other sites
Guest Guest
I also have Averatec D1002UHCE-1 with 8400M GS (256MB).

I tried 8600M GS (512MB), PC boots OK but screen is blank (black).

I can hear Windows Vista sound at boot, HD light is blinking.

So I put 8400M GS back in.

Now I don't know what other MXM II model I should try.

Any suggestion, anyone?

Thanks

PS. I have 8600M GS (512MB) for sale.

I don't know if 8600 GS is compatibale with your system

First uninstall current video card driver ,shut down pc and install new card and check BIOS setting to enable to new video card,

if the screen is blank I would reinsert the card again to make sure its seated properely

Share this post


Link to post
Share on other sites
350zrb
Did you see anything at all at boot up screen? Like Averatec logo and message at the bottom of screen to press del to enter CMOS setup?

After installing did you go to CMOS set up to see whether BIOS detected new hardware??

If either didn't work thats a really major set back.I'm still exploring for options.

The "Averatec" logo and CMOS screen doesn't even display.

So I waited, and I can hear Vista sound (i.e. it is booting OK to Vista).

Just can't see anything.

Can't go to CMOS cause I can't see it.

I don't know if 8600 GS is compatibale with your system

First uninstall current video card driver ,shut down pc and install new card and check BIOS setting to enable to new video card,

if the screen is blank I would reinsert the card again to make sure its seated properely

Thanks, I've tried these.

Put in original and it works fine.

Put in the new card and blank screen -can't go to CMOS.

Share this post


Link to post
Share on other sites
Guest Guest
The "Averatec" logo and CMOS screen doesn't even display.

So I waited, and I can hear Vista sound (i.e. it is booting OK to Vista).

Just can't see anything.

Can't go to CMOS cause I can't see it.

Thanks, I've tried these.

Put in original and it works fine.

Put in the new card and blank screen -can't go to CMOS.

how many beeps do you hear?You should check with BIOS error codes,either the graphic card is not getting enough power(5 beeps for most of the bios) or its BIOS incompatibility issue.

Share this post


Link to post
Share on other sites
350zrb
how many beeps do you hear?You should check with BIOS error codes,either the graphic card is not getting enough power(5 beeps for most of the bios) or its BIOS incompatibility issue.

I don't hear any beep.

It appears to boot normally just blank screen.

I also tried 8600M GT, same result. :)

Share this post


Link to post
Share on other sites
350zrb
So there should be no troubles with bios or anything?

EDIT

Just cancelled 8600m GT .... think I am gonna order the ATI 3650 instead due to the reading I have done on this and other forums. Will this card also work? Will I have to change bios' or anything like that? And what sort of drivers do I use... from ATI or otherwise?

thanks so much... I know nothing about any of this and am tryin to learn.

govtmule - Do you have ATI 3650 yet? Is it compatible with this AIO?

Share this post


Link to post
Share on other sites
Guest Guest
I don't hear any beep.

It appears to boot normally just blank screen.

I also tried 8600M GT, same result. :)

Its likely BIOS issue,contact your pc manufacturer and report those issues so that they will work/release new patches and upgrades for BIOS.

Share this post


Link to post
Share on other sites
Guest Guest
govtmule - Do you have ATI 3650 yet? Is it compatible with this AIO?

this message is for 350zrb

You can contact technical support at Trigem Ph#714-429-8299

Share this post


Link to post
Share on other sites
Guest Interested Person

There is a more recent driver on Trigem's website that also indicates that it supports the 8600M GT.

Must be a BIOS issue.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...