Jump to content
LaptopVideo2Go Forums
mobilenvidia

Latest Sigmatel / IDT Modded Drivers for Win 7 and Vista

Recommended Posts

mobilenvidia

Cheers for that am grabbing these now.

What may need to happen is in future release you may need to add a certain 'Pin' section to the INI.

This section in all INI but is device/model specific.

This tells the driver what is attached to the machine, ie Speakers, Speaker/HP combined, lineout, linein, SPDIF, HDMI, MICs etc etc

I have left this section blank hoping the driver would detect what was where.

What you will need to do is to find the original driver's INI file (WRTxxxxx.ini)

You will need to do a PCI_ID AND SUBSYS search for the exact INI. (the one below is for Dell i9400 and possibly others)

In this INI will be a section like this:

[HKR\Settings\pin]

[HKR\Settings\Pin\08]

CfgDflt = dword: 0x40C003FA

[HKR\Settings\Pin\09]

CfgDflt = dword: 0x01441340

[HKR\Settings\Pin\10]

CfgDflt = dword: 0x04A11020

Bias = hex: FF,04,02

AltCfg = hex: 20,10,81,04

[HKR\Settings\Pin\11]

CfgDflt = dword: 0x90170310

[HKR\Settings\Pin\12]

CfgDflt = dword: 0x40F003FC

[HKR\Settings\Pin\0D]

CfgDflt = dword: 0x0421121F

Action = hex: 81,0E

[HKR\Settings\Pin\0E]

CfgDflt = dword: 0x90170310

[HKR\Settings\Pin\0F]

CfgDflt = dword: 0x408003FB

Use a Text editor (like WOrdpad etc) to open both INI's (original OEM INI and my Modded one)

Copy and Paste the ORIGINAL section to the Modded INI between [HKR\Settings\GPIO] and [HKR\Settings\Connselector] or below [HKR\Settings\pin]

Save the newly modded INI.

Unistall the current driver USING control panels Uninstall (very important)

Now just run setup and hopefully the Audio/jacks will function as they should.

Please report back here if it does or doesn't

Share this post


Link to post
Share on other sites
mobilenvidia
I made what you said, didn't work, install work but there is no sound outpout.

you tried the pin setting method as well as described above ?

Share this post


Link to post
Share on other sites
gtnrkt

With this drivers v6.10.6187 modded, audio out system are working as it should :)

Only external mic doesn't work (internal stereo mics are working (with andreas functions))

And the audio sounds different, audio going only to the right channel also goes a little to the left (might be because of dolby)

Share this post


Link to post
Share on other sites
mobilenvidia
With this drivers v6.10.6187 modded, audio out system are working as it should :)

Only external mic doesn't work (internal stereo mics are working (with andreas functions))

And the audio sounds different, audio going only to the right channel also goes a little to the left (might be because of dolby)

Try lowering Monomix this might be causing your issue, it can be found via the Windows Audio settings

BTW, can you report back on your system tested on and better yet the PCI_ID and SUBSYS numbers ?

Good to hear these work (even though not 100%), was feeling lonely :)

Share this post


Link to post
Share on other sites
Guest NORWAY

LETS FIX THE DELL XPS M1330, once and for all

Windows vista 32bit (windows 7 32 bit) (its the same driver for 64 bit ..it think.. THIS INFO is collected from my laptop running windows 7 RC1 and Vista (both 32 bit )

HARDWARE ID :

HDAUDIO\FUNC_01&VEN_8384&DEV_7616&SUBSYS_10280209&REV_1002

HDAUDIO\FUNC_01&VEN_8384&DEV_7616&SUBSYS_10280209

SETTINGS FROM CORRECT INI file (BASED ON THE LATEST DELL DRIVERS FROM DELL.COM)

[HKR\Settings\pin]
[HKR\Settings\Pin\0A]
CfgDflt = dword: 0x0221121F     
AltCfg = hex: 1F,12,11,02     
Action = hex: 81,0D
[HKR\Settings\Pin\0B]
CfgDflt = dword: 0x400003FA     
[HKR\Settings\Pin\0C]
CfgDflt = dword: 0x400003FB     
[HKR\Settings\Pin\0D]
CfgDflt = dword: 0x90170310     
ExtAmpCtrl = hex: 02,05,02
[HKR\Settings\Pin\0E]
CfgCurr = dword: 0x02A11230     
CfgDflt = dword: 0x02111212
AltCfg = hex: 12,12,11,02,30,12,81,02,30,12,A1,02
Bias = hex: FF,04,02
Action = hex: 0A,0E
[HKR\Settings\Pin\0F]
CfgCurr = dword: 0x0221121F     
CfgDflt = dword: 0x02111211
AltCfg = hex: 11,12,11,02,1F,12,21,02
Action = hex: 81,0D
[HKR\Settings\Pin\10]
CfgDflt = dword: 0x400003FC     
[HKR\Settings\Pin\11]
CfgDflt = dword: 0x400003FD     
[HKR\Settings\Pin\12]
CfgDflt = dword: 0x400003FE     
[HKR\Settings\Pin\13]
CfgDflt = dword: 0x90A60350     
Mic0Type            			= dword: 0 
Mic0XCoord          			= dword: 0
Mic0YCoord          			= dword: 0x00000040 
Mic0ZCoord          			= dword: 0
Mic0VerticalAngle   			= dword: 0
Mic0HorizontalAngle			= dword: 0
Mic1Type            			= dword: 0 
Mic1XCoord          			= dword: 0
Mic1YCoord          			= dword: 0xFFFFFFC0 
Mic1ZCoord          			= dword: 0
Mic1VerticalAngle   			= dword: 0
Mic1HorizontalAngle			= dword: 0
[HKR\Settings\Pin\14]
CfgDflt = dword: 0x400003FF     
[HKR\Settings\Pin\21]
CfgDflt = dword: 0x03461340     
[HKR\Settings\Pin\22]
CfgDflt = dword: 0x40C003F1     
[HKR\Settings\Connselector]
[HKR\Settings\filter\SpeakerHp]
UniqueID                             	= hex: 0
LegacyIoctlHere                      	= hex: 1
Associations                         	= hex: 1
DigitalVolumeControl                 	= hex: 0
EnabledPcmRenderBitsAndRates 		= dword: 0xfffffffe
EnableHwSpeakerConfigurationSupport 	= hex: 1
EnableIntSpkrMute			= hex: 1
EnableVendorPCBeep			= hex: 1
UseHwMuteAlways				= hex: 1
PCBeepMute				= hex: 0
PCBeepVolume				= dword: 0xffd00000 
EnableRenderConvertersAutoSearch	= hex: 1
SystemSpeakerConfiguration		= dword: 0x00000003
ReportInfoForInternalDevPinsToo 	= hex: 0
MasterVolume				= dword: 0xfff40000 
[HKR\settings\filter\MuxedIn1]
UniqueID                             	= hex: 1
LegacyIoctlHere                      	= hex: 0
CaptureConverter                     	= hex: 7
EnableCompositeMuxAndAdcCtrl         	= hex: 0
Associations                         	= hex: 3
EnabledPcmCaptureBitsAndRates        	= dword: 0x0a0060  
DisableMicBoost                      	= hex: 0
MicBoost				= hex: 1
LineInRecVolume				= dword: 0x000fb000
MicInRecVolume				= dword: 0x000fb000
MicBoostLevel   			= dword: 0x00140000   
EnableSubdeviceOnDevicePresence     	= hex: A,0,8,0  
[HKR\settings\filter\MicIn]
UniqueID                             	= hex: 2
LegacyIoctlHere                      	= hex: 0
CaptureConverter                     	= hex: 8
EnableCompositeMuxAndAdcCtrl         	= hex: 0
Associations                            = hex: 5
EnabledPcmCaptureBitsAndRates        	= dword: 0x0a0060  
DisableMicBoost                      	= hex: 0
MicArrayVersion              		= dword: 0x100
MicArrayType                 		= dword: 0      
MicArrayVerticalAngleBegin   		= dword: 0
MicArrayVerticalAngleEnd     		= dword: 0
MicArrayHorizontalAngleBegin		= dword: 0x00FFDDE9 
MicArrayHorizontalAngleEnd		= dword: 0x00002217 
MicArrayFrequencyBandLo			= dword: 0x50 
MicArrayFrequencyBandHi			= dword: 0x2710 
[HKR\Settings\filter\HdmiOut]
UniqueID                             	= hex: 3
LegacyIoctlHere                      	= hex: 0
Associations                         	= hex: 4
EnabledPcmRenderBitsAndRates 		= dword: 0xfffff3fe
SpdifMaster                          	= hex: 2
SpdifOutConverter                    	= hex: 1E
DisableSPDIFControl                     = hex: 0
SpdifOutCtrl	                        = hex: 1
[HKR\settings\filter\MuxedIn1\TopoNames]
MicIn 					= "{CD2AF943-305E-4786-BCFA-1BE25DECACDB}"
[HKR\Settings\filter\MicIn\TopoNames]
MicIn                                	= "{A218C4A7-BDF8-4e59-9BEE-994835B7F393}"   
[HKR\Settings\filter\MuxedIn1\MaxLvlLimiters]
MicBoostLevel 				= dword: 0x00140000
[HKR\Settings\GPIO]
02 					= hex: 0x82
[HKLM\software\SigmaTel\Apo\GFX\SpeakerHp\plugins\MSAPO]
idEffect = dword: 50
idEffectType = dword: 50
load = dword: 1
order = dword: 5
ApoClsId = "{637c490d-eee3-4c0a-973f-371958802da2}"

SMEG HEAD CAN YOU PLEASE ADD THIS TO YOUR FORTHCOMMING MODDED INIS ? (or is that out of the question)

THANK YOU FOR YOU CONTRIBUTION ON THIS ISSUE!

Share this post


Link to post
Share on other sites
mobilenvidia

It's no use changing the INI to the above for your machines, it will work on one machine again and not on others

What will need to happen folk will need to make their own INI based on the one I've made.

Then insert the settings as NORWAY has done above.

So grab the original INI from your latest official driver.

Grab the PIN settings AND the Filter sections (can be quite long)

Insert/replace these 2 sections Insert the Filters section after [HKR\Settings\Connselector]

For fully working Audio driver, you will need to rename any section heading that is not \speaker\ to \speaker\ ie \Speaker1\ and \SpeakerHp\

This will then allow things like the EQ and SRS to work.

Now testing an INI with no Filter section this should make modding in your requires bits more easily.

Share this post


Link to post
Share on other sites
mobilenvidia

Done give the latest driver ago.

/Filters/ sections has been removed, driver still installs and works for me.

The Filters section does mean I loose windows functions

But I can sort this later.

It will be interesting to see if you guys see any difference with this version.

Share this post


Link to post
Share on other sites
burakpadir

i'm so sad for these drivers dont work on my hardware...

HDAUDIO\FUNC_01&VEN_8384&DEV_7661&SUBSYS_104D0C00&REV_1042

HDAUDIO\FUNC_01&VEN_8384&DEV_7661&SUBSYS_104D0C00

Share this post


Link to post
Share on other sites
mobilenvidia

Just trying some things out.

Attached is an INI with no PINs and only Speaker filter header with nothing in it.

I need to know if this works with those who have not been able to get sound.

All I want at this stage is sound, not too worried if the Mics or SPDIF doesn't work.

These IDT driver are very fiddly even empty filter headers will stop a driver service from running.

What will need to happen in the future is copy the 2 sections to the INI to make the drivers work.

But first would really appreciate to see if this INI works may have reduced some features but it's a test for future INI's

WRT.zip

Share this post


Link to post
Share on other sites
Nofearangel

Dell XPS M1730 not fully functional. I did install it over the previous drivers, will try uninstall and install on clean. WHen clicking on test speakers the sound comes through both speakers not left then right. altho on windows playback devices the test works perfectly. on the advanced options page some of the features are cut off cannot make the box bigger to display other functions. The speaker on the task bar displays an x next to it, so unable to adjust the volume. equaliser doesn't have any effect. Not sure if the quality is better could be worse. will post back an update.

Update: Removed all drivers and installed new IDT drivers. SOund worked but no control panel. I wouldn't recommend these for XPS M1730.

Edited by Nofearangel

Share this post


Link to post
Share on other sites
mobilenvidia
Dell XPS M1730 not fully functional. I did install it over the previous drivers, will try uninstall and install on clean. WHen clicking on test speakers the sound comes through both speakers not left then right. altho on windows playback devices the test works perfectly. on the advanced options page some of the features are cut off cannot make the box bigger to display other functions. The speaker on the task bar displays an x next to it, so unable to adjust the volume. equaliser doesn't have any effect. Not sure if the quality is better could be worse. will post back an update

Good that is more like it, I also get the mono speaker test in the new CP (which is really the old CP but more functional)

It is very important that you uninstall the driver when testing anything new, or the new bits may not stick or even add

Use the "Programs" to uninstall the driver this will completely remove everything.

Attached is my Latest INI, there are a mountain of features now enabled in Windows.

BUT you will need to add your Original PIN section for Windows features to work.

Also adding your original filters may bring more rewards but can cause more issues depending on what the filters are. (best ones are speaker filters speaker1, Speaker2 and HpOut may not work)

Avoid MicIn filters these seem not to work well.

WRT.zip

Share this post


Link to post
Share on other sites
hovercraftdriver

You are apparently focusing on the IDT thing and I can appreciate that. But the links in your most recent display driver post aren't working. Any update on that? Sorry to hijack the thread.

Edited by hovercraftdriver

Share this post


Link to post
Share on other sites
mobilenvidia
You are apparently focusing on the IDT thing and I can appreciate that. But the links in your most recent display driver post aren't working. Any update on that? Sorry to hijack the thread.

All 6 links to 185.81 are working just fine

All the modded INFs are working fine.

I do need to make the posts for the drivers on the front page.

Not sure what you are on about ? everything is working

Share this post


Link to post
Share on other sites
phusho

Share this post


Link to post
Share on other sites
Teraphy

What is the error number?

I was having issues with 6187 when I used the pin values. I removed them from the registry, disabled then re-enabled the sound and it is working fine after a Code 10.

Still looking into why this might be an issue...

Share this post


Link to post
Share on other sites
Guest Gta007

If the installation work but there is no sound outpout:

=> Copy and paste ALL line begining by [HKR\........]

From your original WRT.INF to the modded WRT.INF

If you only copy and paste the pin section like you said, you don't take the right audio codec for your hardware :)

That's working fine for me now :)

Share this post


Link to post
Share on other sites
mobilenvidia
If the installation work but there is no sound outpout:

=> Copy and paste ALL line begining by [HKR\........]

From your original WRT.INF to the modded WRT.INF

If you only copy and paste the pin section like you said, you don't take the right audio codec for your hardware :)

That's working fine for me now :)

Good point, folk with issues should give this ago.

Basically REPLACE ALL THESE SECTIONs:

[HKR]

[HKR\Settings]

[HKR\Settings\gpio]

[HKR\Settings\pin]

Not all the below will exist but any sections that do replace

[HKR\Settings\Connselector]

[HKR\Settings\filter\Speaker]

[HKR\Settings\filter\SpeakerHp]

[HKR\Settings\filter\Speaker1]

[HKR\Settings\filter\Speaker2]

[HKR\Settings\filter\HpOut]

[HKR\Settings\filter\HpOut1]

[HKR\Settings\filter\HpOut2]

[HKR\Settings\filter\HpOut3]

[HKR\Settings\filter\MicIn]

[HKR\Settings\filter\MicIn\MaxLvlLimiters]

[HKR\Settings\filter\MicIn1]

[HKR\Settings\filter\MicIn1\MaxLvlLimiters]

[HKR\Settings\filter\MicIn2]

[HKR\Settings\filter\MicIn2\MaxLvlLimiters]

[HKR\Settings\filter\MuxedIn]

[HKR\Settings\filter\MuxedIn\MaxLvlLimiters]

[HKR\Settings\filter\MuxedIn\TopoNames]

[HKR\Settings\filter\MuxedIn1]

[HKR\Settings\filter\MuxedIn1\MaxLvlLimiters]

[HKR\Settings\filter\MuxedIn1\TopoNames]

[HKR\Settings\filter\SpdifOut]

[HKR\settings\filter\SpdifHdmiOut]

[HKR\settings\filter\HdmiOut]

[HKR\Settings\filter\AuxIn]

Share this post


Link to post
Share on other sites
mobilenvidia

Added a heap of screen shots in first post to tempt folk into trying to get it to work on their setup.

The sound quality improvement with SRS and general audio is a day and night difference :)

Share this post


Link to post
Share on other sites
phusho

OK I tried almost everything. I have copied every section with HKR tried without filters and so on just driver can't be loaded with error code 10 i give up

Share this post


Link to post
Share on other sites
Guest Guest
OK I tried almost everything. I have copied every section with HKR tried without filters and so on just driver can't be loaded with error code 10 i give up
OK I tried almost everything. I have copied every section with HKR tried without filters and so on just driver can't be loaded with error code 10 i give up

I've had the same problem with the M1530. The original modded drivers work but without any special features or HDMI port. I tried replacing all the different HKR sections in WRT.ini from the Sigmatel driver from dell.com.

There are several ini's included in the Dell package but WRT_M8-3.ini contained the right hardware code for the M1530 (HDAUDIO\FUNC_01&VEN_8384&DEV_7616&SUBSYS_1028022E=this)

I tried replacing the filters, gpio, pins, codec name, and the default settings. I keep getting an error 10.

The original sigmatel ini file:

[Models]
HDAUDIO\FUNC_01&VEN_8384&DEV_7616&SUBSYS_10280209=this  
HDAUDIO\FUNC_01&VEN_8384&DEV_7616&SUBSYS_1028022E=this 
HDAUDIO\FUNC_01&VEN_8384&DEV_7616=this
Default=this
[NoVistaUI]
[CopyFiles.32]
stacgui.cpl = 0x25
stlang.dll = 0x25
stacsv.exe = 0x25
aestacap.dll = 0x25
aestaren.dll = 0x25
aestecap.dll = 0x25
aestsrv.exe = 0x25
[CopyFiles.64]
stacui64.cpl = 0x25
stlang64.dll = 0x25
stacsv64.exe = 0x25
AESTAC64.dll = 0x25
AESTAR64.dll = 0x25
AESTEC64.dll = 0x25
AESTSr64.exe = 0x25
[DelRegKeys]
HKR\Settings=yes
HKLM\Software\Sigmatel\Presets=Yes
HKLM\Software\SigmaTel\STacGUI=yes
HKLM\Software\SigmaTel\STSysTray=yes
HKLM\Software\SigmaTel\GlobalState=yes
HKLM\SOFTWARE\SigmaTel\Apo=yes
[Apps]
[startServices.32]
STacSV -r
aestsrv.exe -install
[startServices.64]
STacSV64 -r
AESTSr64.exe -install
[stopServices.32]
STacSV.exe -u
AESTSrv.exe remove
[stopServices.64]
STacSV64 -u
AESTSr64.exe -remove
[ReplaceDlls.32]
stapo.dll = 0x25
stcplx.dll = 0x25
aestacap.dll = 0x25
aestaren.dll = 0x25
aestecap.dll = 0x25
[ReplaceDlls.64]
stapo64.dll = 0x25
stcplx64.dll = 0x25
AESTAC64.dll = 0x25
AESTAR64.dll = 0x25
AESTEC64.dll = 0x25
[HKLM\Software\Sigmatel\GlobalState]
[HKLM\Software\Sigmatel\STSysTray\1.0.32]
Config_Lang	    = dword: 0x00000000
ControlPanel	    = "stacgui.cpl"
HideTrayIcon 	    = dword: 0x00000001
PopUpType	    = dword: 0x00000001
PerPortEvents	    = dword: 0x00000001
ConfigCapabilities	= dword: 0x00000000
ShowEventDialog	    = dword: 0x00000001
RecordPriority 	    = dword: 0x00000000
DDLSupport	    = dword: 0x00000000
PollingPeriod	    = dword: 0x000003e8
ForceHT		    = dword: 0x00000000
DefSpkCfg	    = dword: 0x00000004
DolbyCfg	    = dword: 0x00000000
HwSpkCfg	    = dword: 0x00000001
HdmiSupport	    = dword: 0x00000000
HdmiGateId	    = dword: 0x00000001
SpdifGateId	    = dword: 0x00000002
MicRetasking	    = dword: 0x00000000
MultiStream	    = dword: 1
[HKLM\Software\Sigmatel\STSysTray\1.0.64]
Config_Lang	    = dword: 0x00000000
ControlPanel	    = "stacui64.cpl"
HideTrayIcon 	    = dword: 0x00000001
PopUpType	    = dword: 0x00000001
PerPortEvents	    = dword: 0x00000001
ConfigCapabilities	= dword: 0x00000000
ShowEventDialog	    = dword: 0x00000001
RecordPriority 	    = dword: 0x00000000
DDLSupport	    = dword: 0x0
PollingPeriod	    = dword: 0x000003e8
ForceHT		    = dword: 0x00000000
DefSpkCfg	    = dword: 0x00000004
DolbyCfg	    = dword: 0x00000000
HwSpkCfg	    = dword: 0x00000001
HdmiSupport	    = dword: 0x00000000
HdmiGateId	    = dword: 0x00000001
SpdifGateId	    = dword: 0x00000002
MicRetasking	    = dword: 0x00000000
MultiStream	    = dword: 1
[HKLM\SOFTWARE\SigmaTel\GlobalState\STSysTray\1.0]
ShowEventDialog 	= dword: 1
ShowEventDialoga	= dword: 0
ShowEventDialoge	= dword: 1
ShowEventDialogf	= dword: 0
MultiStream	    = dword: 1
[HKR]
CodecName = "STAC9228"
[HKR\Settings]
InitVerbs			    = hex: 01,01,C7,01
BiosType1 			    = hex: 01
TraceFlags						   	= dword: 0x89B3
ImpedanceMeasurementTimeMs 	    = dword: 0
AllowHpOnNotSupportingPin 	    = hex: 1
PmEnabledWidget			    = hex: 0D
CPL_SaveExtraPower		    = hex: 0
CPL_MaySwitchExtAmpPowerState	    = hex: 1
CodecAccessAttempts 		    = dword: 0x000003E8
[HKR\Settings\pin]
[HKR\Settings\Pin\0A]
CfgDflt = dword: 0x0221121F	 
AltCfg = hex: 1F,12,11,02	 
Action = hex: 81,0D
[HKR\Settings\Pin\0B]
CfgDflt = dword: 0x400003FA	 
[HKR\Settings\Pin\0C]
CfgDflt = dword: 0x400003FB	 
[HKR\Settings\Pin\0D]
CfgDflt = dword: 0x90170310	 
ExtAmpCtrl = hex: 02,05,02
[HKR\Settings\Pin\0E]
CfgCurr = dword: 0x02A11230	 
CfgDflt = dword: 0x02111212
AltCfg = hex: 12,12,11,02,30,12,81,02,30,12,A1,02
Bias = hex: FF,04,02
Action = hex: 0A,0E
[HKR\Settings\Pin\0F]
CfgCurr = dword: 0x0221121F	 
CfgDflt = dword: 0x02111211
AltCfg = hex: 11,12,11,02,1F,12,21,02
Action = hex: 81,0D
[HKR\Settings\Pin\10]
CfgDflt = dword: 0x400003FC	 
[HKR\Settings\Pin\11]
CfgDflt = dword: 0x400003FD	 
[HKR\Settings\Pin\12]
CfgDflt = dword: 0x400003FE	 
[HKR\Settings\Pin\13]
CfgDflt = dword: 0x90A60350	 
Mic0Type						= dword: 0 
Mic0XCoord					  = dword: 0
Mic0YCoord					  = dword: 0x00000040 
Mic0ZCoord					  = dword: 0
Mic0VerticalAngle   		    = dword: 0
Mic0HorizontalAngle		    = dword: 0
Mic1Type						= dword: 0 
Mic1XCoord					  = dword: 0
Mic1YCoord					  = dword: 0xFFFFFFC0 
Mic1ZCoord					  = dword: 0
Mic1VerticalAngle   		    = dword: 0
Mic1HorizontalAngle		    = dword: 0
[HKR\Settings\Pin\14]
CfgDflt = dword: 0x400003FF	 
[HKR\Settings\Pin\21]
CfgDflt = dword: 0x03461340	 
[HKR\Settings\Pin\22]
CfgDflt = dword: 0x40C003F1	 
[HKR\Settings\Connselector]
[HKR\Settings\filter\SpeakerHp]
UniqueID						     	= hex: 0
LegacyIoctlHere						  = hex: 1
Associations						 	= hex: 1
DigitalVolumeControl			     	= hex: 0
EnabledPcmRenderBitsAndRates 	    = dword: 0xfffffffe
EnableHwSpeakerConfigurationSupport 	= hex: 1
EnableIntSpkrMute		    = hex: 1
EnableVendorPCBeep		    = hex: 1
UseHwMuteAlways			    = hex: 1
PCBeepMute			    = hex: 0
PCBeepVolume			    = dword: 0xffd00000 
EnableRenderConvertersAutoSearch	= hex: 1
SystemSpeakerConfiguration	    = dword: 0x00000003
ReportInfoForInternalDevPinsToo 	= hex: 0
MasterVolume			    = dword: 0xfff40000 
[HKR\settings\filter\MuxedIn1]
UniqueID						     	= hex: 1
LegacyIoctlHere						  = hex: 0
CaptureConverter					 	= hex: 7
EnableCompositeMuxAndAdcCtrl	     	= hex: 0
Associations						 	= hex: 3
EnabledPcmCaptureBitsAndRates		    = dword: 0x0a0060  
DisableMicBoost						  = hex: 0
MicBoost			    = hex: 1
LineInRecVolume			    = dword: 0x000fb000
MicInRecVolume			    = dword: 0x000fb000
MicBoostLevel   		    = dword: 0x00140000   
EnableSubdeviceOnDevicePresence	 	= hex: A,0,8,0  
[HKR\settings\filter\MicIn]
UniqueID						     	= hex: 2
LegacyIoctlHere						  = hex: 0
CaptureConverter					 	= hex: 8
EnableCompositeMuxAndAdcCtrl	     	= hex: 0
Associations						    = hex: 5
EnabledPcmCaptureBitsAndRates		    = dword: 0x0a0060  
DisableMicBoost						  = hex: 0
MicArrayVersion					  = dword: 0x100
MicArrayType			     	    = dword: 0	  
MicArrayVerticalAngleBegin   	    = dword: 0
MicArrayVerticalAngleEnd	 	    = dword: 0
MicArrayHorizontalAngleBegin	    = dword: 0x00FFDDE9 
MicArrayHorizontalAngleEnd	    = dword: 0x00002217 
MicArrayFrequencyBandLo		    = dword: 0x50 
MicArrayFrequencyBandHi		    = dword: 0x2710 
[HKR\Settings\filter\HdmiOut]
UniqueID						     	= hex: 3
LegacyIoctlHere						  = hex: 0
Associations						 	= hex: 4
EnabledPcmRenderBitsAndRates 	    = dword: 0xfffff3fe
SpdifMaster							  = hex: 2
SpdifOutConverter						= hex: 1E
DisableSPDIFControl					 = hex: 0
SpdifOutCtrl						    = hex: 1
[HKR\settings\filter\MuxedIn1\TopoNames]
MicIn 					= "{CD2AF943-305E-4786-BCFA-1BE25DECACDB}"
[HKR\Settings\filter\MicIn\TopoNames]
MicIn								    = "{A218C4A7-BDF8-4e59-9BEE-994835B7F393}"   
[HKR\Settings\filter\MuxedIn1\MaxLvlLimiters]
MicBoostLevel 			    = dword: 0x00140000
[HKR\Settings\GPIO]
02 					= hex: 0x82
[HKLM\software\SigmaTel\Apo\GFX\SpeakerHp\plugins\MSAPO]
idEffect = dword: 50
idEffectType = dword: 50
load = dword: 1
order = dword: 5
ApoClsId = "{637c490d-eee3-4c0a-973f-371958802da2}"
[HKLM\software\SigmaTel\Apo\LFX\SpeakerHp\plugins\MSAPO]
idEffect = dword: 50
idEffectType = dword: 50
load = dword: 1
order = dword: 5
ApoClsId = "{62dc1a93-ae24-464c-a43e-452f824c4250}"
[HKLM\software\SigmaTel\Apo\GFX\HdmiOut\plugins\MSAPO]
idEffect = dword: 50
idEffectType = dword: 50
load = dword: 1
order = dword: 5
ApoClsId = "{637c490d-eee3-4c0a-973f-371958802da2}"
[HKLM\software\SigmaTel\Apo\LFX\HdmiOut\plugins\MSAPO]
idEffect = dword: 50
idEffectType = dword: 50
load = dword: 1
order = dword: 5
ApoClsId = "{62dc1a93-ae24-464c-a43e-452f824c4250}"
[HKLM\Software\SigmaTel\APO\GFX\SpeakerHp\Plugins]
EndpointId = dword: 0xFFFFFFFF
[HKLM\Software\Sigmatel\APO\LFX\SpeakerHp\Plugins\Spread]
idEffect = dword: 0x8
idEffectType = dword: 0x8
load = dword: 0x1
order = dword: 500
[HKLM\Software\Sigmatel\APO\LFX\SpeakerHp\Presets\_Initial\Spread]
bypass = dword: 0x0
SpoofJackPresence = dword: 1
SpoofJackPresenceFront = dword: 1
SpoofJackPresenceCLfe = dword: 1
SpoofJackPresenceRearPair3 = dword: 1
[HKLM\Software\Sigmatel\APO\LFX\SpeakerHp\Presets\DisableSpread\Spread]
bypass = dword: 0x1
[HKLM\Software\Sigmatel\APO\LFX\SpeakerHp\Presets\EnableSpread\Spread]
bypass = dword: 0x0
[HKLM\Software\Sigmatel\APO\LFX\SpeakerHp\Presets\DisableBoth\Spread]
bypass = dword: 0x1
[HKLM\Software\Sigmatel\APO\LFX\SpeakerHp\Presets\EnableBoth\Spread]
bypass = dword: 0x0
[HKLM\SOFTWARE\SigmaTel\Apo\GFX\SpeakerHp\plugins\AndreaAPO]
idEffect = dword: 41
idEffectType = dword: 50
load = dword: 1
order = dword: 9  
ApoClsId = "{84585C01-7301-4da2-887E-AE94A936B992}"
[HKLM\software\SigmaTel\Apo\LFX\MicIn\plugins\AndreaAPO]
idEffect = dword: 41
idEffectType = dword: 50
load = dword: 1
order = dword: 2
ApoClsId = "{A6A87D18-FE84-468b-A56F-444E54F367BB}"
[HKLM\Software\Sigmatel\Apo\Lfx\MicIn\plugins]
RegVersion = dword: 1
[HKLM\Software\Sigmatel\Apo\Lfx\MicIn\plugins\Gain]
load = dword: 1
idEffect = dword: 44
order = dword: 1000  
[HKLM\Software\Sigmatel\Apo\Lfx\MicIn\presets\_Initial\Gain]
bypass = dword: 0
MasterGainDbX100 = dword: 2500
[HKLM\Software\Sigmatel\Apo\Lfx\MicIn\plugins\PostChanneler]
load = dword: 1
idEffect = dword: 40
order = dword: 1001
[HKLM\SOFTWARE\Sigmatel\APO\UI\MicIn]
Config_ExAdv						    = dword: 0x2
Config_ExTab						    = dword: 0x1
Config_ExAdvName						= "IDS_TITLE_EPPCONFIG_DMIC"
[HKLM\SOFTWARE\Sigmatel\STacGUI]
Config_ExTab   			    = dword: 0x0
Config_Tab			    = dword: 0x0000000A
Config_Lang			    = dword: 0x00000000
Config_Oem			    = dword: 0x00000000
Config_Adv			    = dword: 0x00000001
Config_Portmap			    = dword: 0x00000006
Config_Rates			    = dword: 0x00000000
Config_Spk			    = dword: 0x00000018
Config_Credits			    = dword: 0x00000000
Config_SpkFlags			    = dword: 0x0000001f
Config_Dolby			    = dword: 0x00000000
Config_Update			    = dword: 0x00000001
Config_DefPage			    ="PORTMAP"
Config_Pwr			    = dword: 0x9
[HKLM\SOFTWARE\SigmaTel\STacGUI\XML]
Nconfigs=dword:0x00000001
[HKLM\SOFTWARE\SigmaTel\STacGUI\XML\Configuration[0]]
Name="Open"
Desc="IDS_CONFIG_OPEN"
Njacks=dword:0x00000003
SpkConfig=dword:0x00000004
[HKLM\SOFTWARE\SigmaTel\STacGUI\XML\Configuration[0]\Jack[0]]
Color=dword:0x00000001
Pos=dword:0x00000002
Label=dword:0x00000003
Port=dword:0xa
X1=dword:0x00000019
Y1=dword:0x00000019
X2=dword:0x0000007d
Y2=dword:0x0000007d
Ntypes=dword:0x00000002
Dev[0]=dword:0x00000001
Seq[0]=hex:00
Dev[1]=dword:0x00000002
Seq[1]=hex:ff
[HKLM\SOFTWARE\SigmaTel\STacGUI\XML\Configuration[0]\Jack[1]]
Color=dword:0x00000001
Pos=dword:0x00000002
Label=dword:0x00000003
Port=dword:0xf
X1=dword:0x000000e1
Y1=dword:0x00000019
X2=dword:0x00000145
Y2=dword:0x0000007d
Ntypes=dword:0x00000002
Dev[0]=dword:0x00000001
Seq[0]=hex:01
Dev[1]=dword:0x00000002
Seq[1]=hex:ff
[HKLM\SOFTWARE\SigmaTel\STacGUI\XML\Configuration[0]\Jack[2]]
Color=dword:0x00000001
Pos=dword:0x00000002
Label=dword:0x00000003
Port=dword:0xe
X1=dword:0x000001a9
Y1=dword:0x00000019
X2=dword:0x0000020d
Y2=dword:0x0000007d
Ntypes=dword:0x00000003
Dev[0]=dword:0x00000008
Seq[0]=hex:ff
Dev[1]=dword:0x0000000a
Seq[1]=hex:ff
Dev[2]=dword:0x00000001
Seq[2]=hex:02
[HKLM\SOFTWARE\SigmaTel\STacGUI\XML\Configuration[0]\Panel[2]]
X1=dword:0x00000064
Y1=dword:0x000000c8
X2=dword:0x0000028a
Y2=dword:0x0000015e
[HKLM\SOFTWARE\SigmaTel\STSysTray\1.0\EventExpressions]
Version=dword:1
[HKLM\SOFTWARE\SigmaTel\STSysTray\1.0\EventExpressions\JackPresensea]
Action1="if(JackState(10) == 1 || JackState(15) == 1,(BypassSystemEq(1)),(BypassSystemEq(0)))"
Action2="if(JackState(10) == 1 || JackState(15) == 1,(BypassSystemComp(1)),(BypassSystemComp(0)))"
Action3="if(JackState(10) == 0 && JackState(15) == 0 && JackState(14) == 0 && GetPortPopup(14) == 1,(SetDeviceType(10,2)),(0))"
Action4="if(JackState(10) == 0 && JackState(15) == 0 && JackState(14) == 0 && GetPortPopup(14) == 1,(SetDeviceType(15,2)),(0))"
Action5="if(JackState(10) == 0 && JackState(15) == 0 && JackState(14) == 0 && GetPortPopup(14) == 1,(SetDeviceType(14,8)),(0))"
[HKLM\SOFTWARE\SigmaTel\STSysTray\1.0\EventExpressions\JackPresensef]
Action1="if(JackState(10) == 1 || JackState(15) == 1,(BypassSystemEq(1)),(BypassSystemEq(0)))"
Action2="if(JackState(10) == 1 || JackState(15) == 1,(BypassSystemComp(1)),(BypassSystemComp(0)))"
Action3="if(JackState(10) == 0 && JackState(15) == 0 && JackState(14) == 0 && GetPortPopup(14) == 1,(SetDeviceType(10,2)),(0))"
Action4="if(JackState(10) == 0 && JackState(15) == 0 && JackState(14) == 0 && GetPortPopup(14) == 1,(SetDeviceType(15,2)),(0))"
Action5="if(JackState(10) == 0 && JackState(15) == 0 && JackState(14) == 0 && GetPortPopup(14) == 1,(SetDeviceType(14,8)),(0))"
[HKLM\SOFTWARE\SigmaTel\STSysTray\1.0\EventExpressions\JackPresensee]
Action1="if(JackState(10) == 0 && JackState(15) == 0 && JackState(14) == 0 && GetPortPopup(14) == 1,(SetDeviceType(10,2)),(0))"
Action2="if(JackState(10) == 0 && JackState(15) == 0 && JackState(14) == 0 && GetPortPopup(14) == 1,(SetDeviceType(15,2)),(0))"
Action3="if(JackState(10) == 0 && JackState(15) == 0 && JackState(14) == 0 && GetPortPopup(14) == 1,(SetDeviceType(14,8)),(0))"
[HKLM\SOFTWARE\SigmaTel\STSysTray\1.0\EventExpressions\JackDevicea]
Action1="if(GetDeviceType(10) == 1,(SetDeviceType(15, 1)),(0))"
Action2="if(GetDeviceType(10) == 2,(SetDeviceType(15, 2)),(0))"
Action3="if(JackState(15) == 1,(SetVerified(15, 1)),(0))"
Action4="if(GetDeviceType(10) == 1 && JackState(14) == 0,(SetDeviceType(14, 1)),(0))"
Action5="if(GetDeviceType(10) == 2 && JackState(14) == 0,(SetDeviceType(14, 8)),(0))"
Action6="if(JackState(10) == 0 && JackState(15) == 0 && JackState(14) == 0 && GetPortPopup(14) == 1,(SetDeviceType(10,2)),(0))"
Action7="if(JackState(10) == 0 && JackState(15) == 0 && JackState(14) == 0 && GetPortPopup(14) == 1,(SetDeviceType(15,2)),(0))"
Action8="if(JackState(10) == 0 && JackState(15) == 0 && JackState(14) == 0 && GetPortPopup(14) == 1,(SetDeviceType(14,8)),(0))"
[HKLM\SOFTWARE\SigmaTel\STSysTray\1.0\EventExpressions\JackDevicef]
Action1="if(GetDeviceType(15) == 1,(SetDeviceType(10, 1)),(0))"
Action2="if(GetDeviceType(15) == 2,(SetDeviceType(10, 2)),(0))"
Action3="if(JackState(10) == 1,(SetVerified(10, 1)),(0))"
Action4="if(GetDeviceType(10) == 1 && JackState(14) == 0,(SetDeviceType(14, 1)),(0))"
Action5="if(GetDeviceType(10) == 2 && JackState(14) == 0,(SetDeviceType(14, 8)),(0))"
Action6="if(JackState(10) == 0 && JackState(15) == 0 && JackState(14) == 0 && GetPortPopup(14) == 1,(SetDeviceType(10,2)),(0))"
Action7="if(JackState(10) == 0 && JackState(15) == 0 && JackState(14) == 0 && GetPortPopup(14) == 1,(SetDeviceType(15,2)),(0))"
Action8="if(JackState(10) == 0 && JackState(15) == 0 && JackState(14) == 0 && GetPortPopup(14) == 1,(SetDeviceType(14,8)),(0))"
[HKLM\SOFTWARE\SigmaTel\STSysTray\1.0\EventExpressions\JackDevicee]
Action1="if((GetDeviceType(14)) == 1,(SetDeviceType(10, 1)),(SetDeviceType(10, 2)))"
Action2="if(JackState(10) == 1,(SetVerified(10, 1)),(0))"
Action3="if((GetDeviceType(14)) == 1,(SetDeviceType(15, 1)),(SetDeviceType(15, 2)))"
Action4="if(JackState(15) == 1,(SetVerified(15, 1)),(0))"
Action5="if(JackState(10) == 0 && JackState(15) == 0 && JackState(14) == 0 && GetPortPopup(14) == 1,(SetDeviceType(10,2)),(0))"
Action6="if(JackState(10) == 0 && JackState(15) == 0 && JackState(14) == 0 && GetPortPopup(14) == 1,(SetDeviceType(15,2)),(0))"
Action7="if(JackState(10) == 0 && JackState(15) == 0 && JackState(14) == 0 && GetPortPopup(14) == 1,(SetDeviceType(14,8)),(0))"[/code]

My attempt at modding your WRT.ini v1.022 (just the pertinent sections):
[code][HKR]
CodecName = "STAC9228"
[HKR\Settings]
InitVerbs			    = hex: 01,01,C7,01
BiosType1 			    = hex: 01
TraceFlags						   	= dword: 0x89B3
ImpedanceMeasurementTimeMs 	    = dword: 0
AllowHpOnNotSupportingPin 	    = hex: 1
PmEnabledWidget			    = hex: 0D
CPL_SaveExtraPower		    = hex: 0
CPL_MaySwitchExtAmpPowerState	    = hex: 1
CodecAccessAttempts 		    = dword: 0x000003E8
[HKR\Settings\pin]
[HKR\Settings\Pin\0A]
CfgDflt = dword: 0x0221121F	 
AltCfg = hex: 1F,12,11,02	 
Action = hex: 81,0D
[HKR\Settings\Pin\0B]
CfgDflt = dword: 0x400003FA	 
[HKR\Settings\Pin\0C]
CfgDflt = dword: 0x400003FB	 
[HKR\Settings\Pin\0D]
CfgDflt = dword: 0x90170310	 
ExtAmpCtrl = hex: 02,05,02
[HKR\Settings\Pin\0E]
CfgCurr = dword: 0x02A11230	 
CfgDflt = dword: 0x02111212
AltCfg = hex: 12,12,11,02,30,12,81,02,30,12,A1,02
Bias = hex: FF,04,02
Action = hex: 0A,0E
[HKR\Settings\Pin\0F]
CfgCurr = dword: 0x0221121F	 
CfgDflt = dword: 0x02111211
AltCfg = hex: 11,12,11,02,1F,12,21,02
Action = hex: 81,0D
[HKR\Settings\Pin\10]
CfgDflt = dword: 0x400003FC	 
[HKR\Settings\Pin\11]
CfgDflt = dword: 0x400003FD	 
[HKR\Settings\Pin\12]
CfgDflt = dword: 0x400003FE	 
[HKR\Settings\Pin\13]
CfgDflt = dword: 0x90A60350	 
Mic0Type						= dword: 0 
Mic0XCoord					  = dword: 0
Mic0YCoord					  = dword: 0x00000040 
Mic0ZCoord					  = dword: 0
Mic0VerticalAngle   		    = dword: 0
Mic0HorizontalAngle		    = dword: 0
Mic1Type						= dword: 0 
Mic1XCoord					  = dword: 0
Mic1YCoord					  = dword: 0xFFFFFFC0 
Mic1ZCoord					  = dword: 0
Mic1VerticalAngle   		    = dword: 0
Mic1HorizontalAngle		    = dword: 0
[HKR\Settings\Pin\14]
CfgDflt = dword: 0x400003FF	 
[HKR\Settings\Pin\21]
CfgDflt = dword: 0x03461340	 
[HKR\Settings\Pin\22]
CfgDflt = dword: 0x40C003F1	 
[HKR\Settings\Connselector]
[HKR\Settings\filter\SpeakerHp]
UniqueID						     	= hex: 0
LegacyIoctlHere						  = hex: 1
Associations						 	= hex: 1
DigitalVolumeControl			     	= hex: 0
EnabledPcmRenderBitsAndRates 	    = dword: 0xfffffffe
EnableHwSpeakerConfigurationSupport 	= hex: 1
EnableIntSpkrMute		    = hex: 1
EnableVendorPCBeep		    = hex: 1
UseHwMuteAlways			    = hex: 1
PCBeepMute			    = hex: 0
PCBeepVolume			    = dword: 0xffd00000 
EnableRenderConvertersAutoSearch	= hex: 1
SystemSpeakerConfiguration	    = dword: 0x00000003
ReportInfoForInternalDevPinsToo 	= hex: 0
MasterVolume			    = dword: 0xfff40000 
[HKR\settings\filter\MuxedIn1]
UniqueID						     	= hex: 1
LegacyIoctlHere						  = hex: 0
CaptureConverter					 	= hex: 7
EnableCompositeMuxAndAdcCtrl	     	= hex: 0
Associations						 	= hex: 3
EnabledPcmCaptureBitsAndRates		    = dword: 0x0a0060  
DisableMicBoost						  = hex: 0
MicBoost			    = hex: 1
LineInRecVolume			    = dword: 0x000fb000
MicInRecVolume			    = dword: 0x000fb000
MicBoostLevel   		    = dword: 0x00140000   
EnableSubdeviceOnDevicePresence	 	= hex: A,0,8,0  
[HKR\settings\filter\MicIn]
UniqueID						     	= hex: 2
LegacyIoctlHere						  = hex: 0
CaptureConverter					 	= hex: 8
EnableCompositeMuxAndAdcCtrl	     	= hex: 0
Associations						    = hex: 5
EnabledPcmCaptureBitsAndRates		    = dword: 0x0a0060  
DisableMicBoost						  = hex: 0
MicArrayVersion					  = dword: 0x100
MicArrayType			     	    = dword: 0	  
MicArrayVerticalAngleBegin   	    = dword: 0
MicArrayVerticalAngleEnd	 	    = dword: 0
MicArrayHorizontalAngleBegin	    = dword: 0x00FFDDE9 
MicArrayHorizontalAngleEnd	    = dword: 0x00002217 
MicArrayFrequencyBandLo		    = dword: 0x50 
MicArrayFrequencyBandHi		    = dword: 0x2710 
[HKR\Settings\filter\HdmiOut]
UniqueID						     	= hex: 3
LegacyIoctlHere						  = hex: 0
Associations						 	= hex: 4
EnabledPcmRenderBitsAndRates 	    = dword: 0xfffff3fe
SpdifMaster							  = hex: 2
SpdifOutConverter						= hex: 1E
DisableSPDIFControl					 = hex: 0
SpdifOutCtrl						    = hex: 1
[HKR\settings\filter\MuxedIn1\TopoNames]
MicIn 					= "{CD2AF943-305E-4786-BCFA-1BE25DECACDB}"
[HKR\Settings\filter\MicIn\TopoNames]
MicIn								    = "{A218C4A7-BDF8-4e59-9BEE-994835B7F393}"   
[HKR\Settings\filter\MuxedIn1\MaxLvlLimiters]
MicBoostLevel 			    = dword: 0x00140000
[HKR\Settings\GPIO]
02 					= hex: 0x82

The version from Dell.com is from 2007 if that matters.

Share this post


Link to post
Share on other sites
CrendKing

Here is what I did to get it worked in a Dell Vostro 1500 with SigmaTel 9205. I download the modded driver, copied pin information to the inf. The [HKR\Settings] section and [HKR\Settings\GPIO] section are different from my original inf, and I used the one in the mod, because I considered they are related to software. In my first try, I left every filter section untouched, and get error code 10 after installation. Second try, grabbed the v1.022 inf from here, and left every filter section commented, and the driver worked after installation. Note that there is no Speaker filter in my original inf, only SpeakerHp, but it still produces sound, and the control panel works fine. If I add ANY of the filters from the original inf to the mod inf, error code 10. As mobilenvidia said here, even empty header is not allowed.

Below are all the filters from my original inf. Michael's mod works in my case, even with all filters enabled. I don't know what I could gain if one can get the mod with filter sections presented in practice. And I'm also wondered what is reason of the filter sections.

One thing imperfect is, the Vista Volume Mixer always declares "No audio device is installed", and the volume level is always 0. Seems I have to hide the system tray icon.

My point is: if you get error code 10, try to disable all filter sections first, and hear if there is sound.

Thanks to mobilenvidia for this great work!

[HKR\Settings\filter\SpeakerHp]
UniqueID							     = hex: 0
LegacyIoctlHere						  = hex: 1
RenderConverter						  = hex: 10
Associations						    = hex: 1
DigitalVolumeControl					 = hex: 0
EnabledPcmRenderBitsAndRates		     = dword: 0xfffffffe
EnableHwSpeakerConfigurationSupport	  = hex: 0
EnableVendorPcBeep					   = hex: 1
PCBeepVolume			    = dword: 0xffd00000
FadeAudio							    = hex: 1
EnableSetFormatSupport			       = hex: 1
EnableIntSpkrMute			     = hex: 1
UseHwMuteAlways			    = hex: 1
DisableMasterVolume		    = hex: 0
MasterMute			    = hex: 0
ReportInfoForInternalDevPinsToo	 = hex: 0
MasterVolume			    = dword: 0xfff40000
MasterControlsIndependentMixerInputs	= hex: 1
DisableNonPcmPin		    = hex: 1
CombinePcmAndNonPcmPins		    = hex: 0
[HKR\settings\filter\MuxedIn1]
UniqueID							     = hex: 1
LegacyIoctlHere						  = hex: 0
CaptureConverter						 = hex: 12
EnableCompositeMuxAndAdcCtrl		     = hex: 0
Associations						    = hex: 2
EnabledPcmCaptureBitsAndRates		    = dword: 0x0a0060  
DisableMicBoost						  = hex: 0
MicBoost							     = hex: 1
MicBoostAsAgc			    = hex: 0
LineInRecVolume			    = dword: 0x000fb000
MicInRecVolume			    = dword: 0x000fb000
MicBoostLevel		  	 = dword: 0x00140000  
EnableSubdeviceOnDevicePresence	     = hex: A,0,8,0  
[HKR\settings\filter\MicIn]
UniqueID							     = hex: 2
LegacyIoctlHere						  = hex: 0
CaptureConverter						 = hex: 13
EnableCompositeMuxAndAdcCtrl		     = hex: 0
Associations						    = hex: 3
EnabledPcmCaptureBitsAndRates		    = dword: 0x0a0060  
MicArrayVersion					  = dword: 0x100
MicArrayType						 = dword: 0	  
MicArrayVerticalAngleBegin		   = dword: 0
MicArrayVerticalAngleEnd		     = dword: 0
MicArrayHorizontalAngleBegin	    = dword: 0x00FFDDE9
MicArrayHorizontalAngleEnd	    = dword: 0x00002217
MicArrayFrequencyBandLo		    = dword: 0x50
MicArrayFrequencyBandHi		    = dword: 0x2710
[HKR\Settings\filter\SpdifOut]
UniqueID							    = hex: 3
LegacyIoctlHere		     = hex: 0
Associations						    = hex: 4
SpdifMaster			     = hex: 10
SpdifOutConverter		    = hex: 1F
DisableSPDIFControl		    = hex: 0
SpdifOutCtrl					= hex: 1
EnabledPcmRenderSpdifBitsAndRates	= dword: 0x1F05E0
DiscreteRanges			    = hex: 1
EnabledNonPcmBitsAndRates = dword: 0x0020040  
[HKR\settings\filter\MuxedIn1\TopoNames]
MicIn					 = "{CD2AF943-305E-4786-BCFA-1BE25DECACDB}"
[HKR\Settings\filter\MicIn\TopoNames]
MicIn								    = "{A218C4A7-BDF8-4e59-9BEE-994835B7F393}"  
[HKR\Settings\filter\MuxedIn1\MaxLvlLimiters]
MicBoostLevel			     = dword: 0x00140000

Edited by Teraphy

Share this post


Link to post
Share on other sites
mobilenvidia

Very frustrating, but very worthwhile to get some decent sounds from my lappy.

The i9400 is relatively easy to mod for it to work.

Seems to work with and without PINS and filters although with differing results.

Is anybody getting these to work ? or am I the only one :)

Need more feedback from folk with working drivers.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...