neilg Posted March 29, 2011 Report Share Posted March 29, 2011 Hello all I am having a problem re-flashing the video card to the backup bios I took. I used nvflash 5.95 and created a log. Any help will be appreciated. Thanks *** NVFLASH LOG FILE *** Version 5.95 Command: flash FindDevices: Device:00:00:00=8086:2A00:1028:01F7 Device:00:01:00=8086:2A01:1028:01F7 Device:00:1A:00=8086:2834:1028:01F7 Device:00:1A:01=8086:2835:1028:01F7 Device:00:1B:00=8086:284B:1028:01F7 Device:00:1C:00=8086:283F:1028:01F7 Device:00:1C:01=8086:2841:1028:01F7 Device:00:1C:03=8086:2845:1028:01F7 Device:00:1C:04=8086:2847:1028:01F7 Device:00:1C:05=8086:2849:1028:01F7 Device:00:1D:00=8086:2830:1028:01F7 Device:00:1D:01=8086:2831:1028:01F7 Device:00:1E:00=8086:2448:1028:01F7 Device:00:1F:00=8086:2811:1028:01F7 Device:00:1F:01=8086:2850:1028:01F7 Device:01:00:00=10DE:01B3:FFFF:FFFF BRIDGE Device:02:00:00=10DE:01B3:FFFF:FFFF BRIDGE Device:02:01:00=10DE:01B3:FFFF:FFFF BRIDGE Device:03:00:00=10DE:0409:161F:2052 GPU Device:05:01:00=1180:0832:1028:01F7 Device:05:01:01=1180:0822:1028:01F7 Device:05:01:02=1180:0843:1028:01F7 Device:05:01:03=1180:0592:1028:01F7 Device:05:01:04=1180:0852:1028:01F7 Device:09:00:00=14E4:1672:1028:01F7 Device:0C:00:00=8086:4229:8086:1100 Device:0F:00:00=1971:0000:105B:0003 One to one mode Testing adapter: GeForce 8700M GT (10DE,0409,161F,2052) H:02:SP0 B:03,PCI,D:00,F:00 Action: Override subvendor strap. Original NV_PEXTDEV_BOOT_0: 0x8F44A48A New NV_PEXTDEV_BOOT_0: 0x8F44A48A Action: Read image head. Action: Identify EEPROM. Atmel Serial EEPROM Identify. Reported Manufacturer Code (JEDEC): 00 Reported Device Code (JEDEC): 0000 Reported Manufacturer Code (SST): 00 Reported Device Code (SST): 00 Reported Manufacturer Code (Atmel): 1F Reported Device Code (Atmel): 60 EEPROM ID (1F,0060) : Atmel AT25F1024 2.7-3.6V 1024Kx1S, page Action: Read EEPROM image. Reading EEPROM bytes. Start: 0x00000000 Count: 1024 Read complete. Testing Image: backup.rom Mismatch Type: Computed: 0x0000000E WARNING: Firmware image PCI Subsystem ID (1028.019C) does not match adapter PCI Subsystem ID (161F.2052). WARNING: Firmware image Board ID (8434) does not match adapter Board ID (841C). Overriding PCI subsystem ID mismatch ERROR: Update aborted Exit Code: 2 Quote Link to comment Share on other sites More sharing options...
Guest neilg Posted April 1, 2011 Report Share Posted April 1, 2011 Update problem solved. Had to enter "y" for confirmation when doing a blind update. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.