Jump to content
LaptopVideo2Go Forums

GeForce 4 488 Go - 3DMark Scores


Guest [mouta]

Recommended Posts

Guest [mouta]

Hi guys, i need some help on the overclocking, i mean some informations. I got a GeForce 4 488 Go 64 MB, will i got a really better performance with the overclocking? I can access the overclock option on NVIDIA Panel, i'm using the 56.56 drivers with Pieter INF. With the overclock will i take risks? Can i screw up my video card and the laptop? Thanks in advance.

Btw i got 327 in 3DMark 2003 and 5643 in 3DMark 2001 SE. (Without overclock)

Edited by dontknow
Link to comment
Share on other sites

Guest w00ters

hey man,

O/Cing will give a slight increase [how much is determined by the O/C]. First you need a few things:

  • I8KFanGUI
  • Once Installed, note current CPU, GPU, temps.
  • O/C Property page in display properties

What you want to do is bump memory speeds up slightly. Note temp changes. Keep bumping the mem speeds up [as they give most performance]. Don't O/C core too much [adds heat/less performance]. Keep going till satisfied [or GPU is too hot]. Now benchmark. Posts results :)

Link to comment
Share on other sites

[mouta]

What speed CPU do you have, I've added you to my Performance page.

Pieter.

Link to comment
Share on other sites

[Mouta]

Add your CPU speed as well (Ta very much)

I see you've added your specs to your sig (nice machine)

Pieter.

Link to comment
Share on other sites

Guest [mouta]
[Mouta]

Add your CPU speed as well (Ta very much)

I see you've added your specs to your sig (nice machine)

Pieter.

Thanks. :) It was not cheaper too... :) Btw i tried the 53.81 and got a worst performance so i changed to the 56.56 again but the strange thing is that when i tested 56.56 i got even worst performance than the 53.81... i can't get the performance i got 1rst time with 56.56 so i changed back to the 53.81... what do you think it happen Pieter? Thanks in advance.

Link to comment
Share on other sites

I have the same problem with my machine.

Some of the performance tabs in the Diplay properties arn't working yet. (56.56)

When they do, it should make a difference.

Pieter.

Link to comment
Share on other sites

That is entirely up to you.

You use what ever driver works best for you.

That is the whole point of all these INF so you have a choice.

Enjoy,

Pieter.

Link to comment
Share on other sites

Guest [mouta]
That is entirely up to you.

You use what ever driver works best for you.

That is the whole point of all these INF so you have a choice.

Enjoy,

Pieter.

Your 20.15 INF correct some performance problems? I noticed you're making many chances to the INF... :)

Link to comment
Share on other sites

I make many changes to my INFs as I find new things, sometimes fix other things or add new GPU's.

I don't work on performance as this requires modifying the drivers them selves.

If you want speed StarStorm is the answer (at loss of quality ?)

All 20.15 INFs are internally the same, so the only difference in speed is related to the driver it self.

Hope this helps,

Pieter.

Link to comment
Share on other sites

Guest [mouta]

Hi again Pieter, i've made some more benchmark tests. :) Here are the results:

53.81 - 20.16 INF

3dmark 2001 - 5278

3dMark 2003 - 341

53.82 - 20.17 INF

3dmark 2001 - 5556

3dmark 2003 - 335

Link to comment
Share on other sites

Quite a difference in 3DMark 2k1.

Still not as fast as 56.56 in 2k1

Although 2k3 scores are getting faster (even though the 4x0go arn't very good at DX9

Have you tried some of the earlier 44.xx drivers with 2k1 ?

Pieter.

Link to comment
Share on other sites

Guest [mouta]
Have you tried some of the earlier 44.xx drivers with 2k1 ?

Pieter.

No, but i've saw some guys saying that the detonator get better results at 3dmark01 but i like to use updated drivers :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...