bloodborne Posted January 11, 2019 Report Share Posted January 11, 2019 Did a soul lot of searching throughout the internet even trying some of the tutorials as I followed other users that had success installing the same MxM card into this Dell and yet I failed so I was pointed to this direction for some advice or get some info on what i can be doing wrong while modifying the inf file to make my card run properly. I did get the driver to install at one point yet failed with low 9-13 fps running unigine valley, from my understanding this could be that I possibly picked the wrong lines to edit causing confusion and having optimus turned off so everything I am running is using the intel gpu? Hope someone can gleam some light my way and thanks in advance. Device ID: currently with 980m installed, device manager showing basic display. PCI\VEN_10DE&DEV_1617&SUBSYS_15CD1028&REV_A1 PCI\VEN_10DE&DEV_1617&SUBSYS_15CD1028 PCI\VEN_10DE&DEV_1617&CC_030000 PCI\VEN_10DE&DEV_1617&CC_0300 Tried modifying nvci.inf Quote Link to comment Share on other sites More sharing options...
mobilenvidia Posted January 11, 2019 Report Share Posted January 11, 2019 We specialise in trying to support all GPU's, where as some others specialise in specific GPU's Your GPU is supported but may require special MxM settings to work properly Try a driver with its modified INF and see how you get on, the 415series are newest drivers Possibly have a look over here should above fail More into MxM upgrade driver mods Quote Link to comment Share on other sites More sharing options...
bloodborne Posted January 12, 2019 Author Report Share Posted January 12, 2019 18 hours ago, mobilenvidia said: We specialise in trying to support all GPU's, where as some others specialise in specific GPU's Your GPU is supported but may require special MxM settings to work properly Try a driver with its modified INF and see how you get on, the 415series are newest drivers Possibly have a look over here should above fail More into MxM upgrade driver mods Thank you very much for the link, got it working appreciate it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.