Khan_Phelan Posted February 23, 2006 Report Share Posted February 23, 2006 Hello there, I´ve got a brand new ACER ASPIRE 5652 WLMi feat. CORE DUO T2300, 2GB RAM DDR2, 100GB S-ATA and the new Geforce Go7600 with 128MB. When I run the 3DMark2005 Test, I only reach 2161 point!!! That´s not good for this hardware! A X700 with 128MB with a 750 processor reaches 2600 points! Some Go6600 reach 3000 points! What´s wrong with my system? I don´t understand it! Does anyone know, if there are problems with the Go7600??? Greetings from Germany Khan_Phelan Quote Link to comment Share on other sites More sharing options...
mobilenvidia Posted February 23, 2006 Report Share Posted February 23, 2006 Khan, Have you set the performance/quality sliders to performnace it the display properties ? This can make a big difference. Also make sure Powermizer is set to max performance and that the power scheme is set to always on. This should then setup your machine for the fastest possbile performance. Quote Link to comment Share on other sites More sharing options...
Khan_Phelan Posted February 23, 2006 Author Report Share Posted February 23, 2006 hmmm, I thought that I used all performance settings, but I have to check it. The ACER-Software isn´t very userfriendly. But I thought that the Go7600 is faster than the X1600!!! Maybe I was wrong... Quote Link to comment Share on other sites More sharing options...
Miki Posted February 23, 2006 Report Share Posted February 23, 2006 Is your Vertical Sync set to off ? Quote Link to comment Share on other sites More sharing options...
Khan_Phelan Posted February 23, 2006 Author Report Share Posted February 23, 2006 Yes, I turned off vert. sync! That are the reasons I don´t understand why my system isn´t fast at all... Quote Link to comment Share on other sites More sharing options...
mobilenvidia Posted February 23, 2006 Report Share Posted February 23, 2006 What are the default clocks for your go7600 ? This should be on the over clocking page. Quote Link to comment Share on other sites More sharing options...
Khan_Phelan Posted February 23, 2006 Author Report Share Posted February 23, 2006 GPU-Speed is at 450Mhz and RAM-Speed at 350Mhz. Quote Link to comment Share on other sites More sharing options...
Guest Guest Posted February 25, 2006 Report Share Posted February 25, 2006 I have GeForce Go 6600 and i can goto 2200 points without problem Quote Link to comment Share on other sites More sharing options...
Guest sissi Posted March 6, 2006 Report Share Posted March 6, 2006 3DMark05 Results Result 1 File Name Primary Device NVIDIA GeForce Go 7600 Width 1024 Height 768 Anti-Aliasing None Anti-Aliasing Quality 0 Texture Filtering Optimal Max Anisotropy 4 VS Profile 3_0 PS Profile 3_0 Force Full Precision No Disable DST No Disable Post-Processing No Force Software Vertex Shader No Color Mipmaps No Repeat Tests Off Fixed Framerate Off Comment 3DMark Score 3432 3DMarks GT1 - Return To Proxycon 14,9 FPS GT2 - Firefly Forest 10,5 FPS GT3 - Canyon Flight 16,6 FPS CPU Score 4077 CPUMarks CPU Test 1 2,4 FPS CPU Test 2 3,1 FPS Fill Rate - Single-Texturing 0,0 FPS Fill Rate - Multi-Texturing 0,0 FPS Pixel Shader 0,0 FPS Vertex Shader - Simple 0,0 FPS Vertex Shader - Complex 0,0 FPS Graphics Bus 8 Triangles 0,0 FPS 32 Triangles 0,0 FPS 128 Triangles 0,0 FPS 512 Triangles 0,0 FPS 2048 Triangles 0,0 FPS 32768 Triangles 0,0 FPS Family Genuine Intel® CPU T2300 @ 1.66GHz Internal Clock 1663 MHz External Clock 166 MHz Description NVIDIA GeForce Go 7600 Total Local Video Memory 256 MB Driver Version 8.3.4.0 VGA Memory Clock 0 Hz VGA Core Clock 0 Hz Total Physical Memory 1022 MB Operating System Microsoft Windows XP Quote Link to comment Share on other sites More sharing options...
Miki Posted March 6, 2006 Report Share Posted March 6, 2006 3DMark Score 3432 3DMarks GT1 - Return To Proxycon 14,9 FPS GT2 - Firefly Forest 10,5 FPS GT3 - Canyon Flight 16,6 FPS CPU Score 4077 CPUMarks CPU Test 1 2,4 FPS CPU Test 2 3,1 FPS Unfortunately I think it is fast as it is supposed to be - slightly slower then 6800go. I get about 3750 in 3DMark05. It would certainly be interesting to see your core and memory speeds . BTW GF 7600 go is supposed to be made in 90nm process so it should be a good overclocker. Quote Link to comment Share on other sites More sharing options...
®®® Posted March 7, 2006 Report Share Posted March 7, 2006 OT: I'm curious if Go 7600 is a MXM card. If so, which type? Quote Link to comment Share on other sites More sharing options...
Guest Libtech Posted July 13, 2006 Report Share Posted July 13, 2006 hmmm, I thought that I used all performance settings, but I have to check it. The ACER-Software isn´t very userfriendly. But I thought that the Go7600 is faster than the X1600!!! Maybe I was wrong... The 7600 desktop is faster than the x1600. But if you check out the architecture (pipelines etc.) the 7600go is a stripped down version of its desktop version. while the x1600 maintains its general architecture. So the mobile x1600 is a bit faster than the 7600go. Quote Link to comment Share on other sites More sharing options...
Ice-Tea Posted July 13, 2006 Report Share Posted July 13, 2006 Just wondering if you plugged your AC cord in? And I'd like to know if it's MXM, too, but I never found any proof for Acers :) Quote Link to comment Share on other sites More sharing options...
®®® Posted July 16, 2006 Report Share Posted July 16, 2006 That's the changelog from the latest BIOS release for ACER 565x: Grapevine 3G SKU bios version start here. [sOP] 01) Unzip HBL50_210_Winflash.zip under WindowsXP. 02) Click Flash32 application in the unziped folder. 03) System will automatically update bios. [Fixed hostory] System BIOS 1.REMOVE G72M vbios. 2.Fixed if insert web cam (usb interface), HCT test fail. 3.Implement TJ85 cpu function 4.After enter s4, wake in lan. And the s4 fail 5.modify CCD Int 15h function 6.Modify hdd password lib 7.Modify the HDD only run DMA mode 2, modify it to DMA 5 <- what a performance loss, glad they changed that :) 8.MODIFY AZALIA CODEC TABLE. 9.Change VGA share memory to 32M 10.IMPLEMENT ACER PRELOAD INT 15H FUNCTION(38,39,3A,3B,3C) 11.Fix 5787 UUID incorrect 12.Fixed if insert camera device, can't long run reboot and s4 13.CHANGE G72MZ VGA BIOS. EC BIOS 1. Fan always on when EEPROM wrong default Add function 1. Support TJ85 CPU 2. Support Adaptor loading protection function Whatever the cause for the change of the VBIOS was... No MXM hint in the INF of the original driver :) Quote Link to comment Share on other sites More sharing options...
trailmaker Posted September 28, 2006 Report Share Posted September 28, 2006 Hello there,I´ve got a brand new ACER ASPIRE 5652 WLMi feat. CORE DUO T2300, 2GB RAM DDR2, 100GB S-ATA and the new Geforce Go7600 with 128MB. When I run the 3DMark2005 Test, I only reach 2161 point!!! That´s not good for this hardware! A X700 with 128MB with a 750 processor reaches 2600 points! Some Go6600 reach 3000 points! What´s wrong with my system? I don´t understand it! Does anyone know, if there are problems with the Go7600??? Greetings from Germany Khan_Phelan I have the same problem. I've got a Toshiba Satellite P100, Core Duo T2300, 1GB Ram and GF Go 7600 with 128 Mb. I get ~2100 points in 3dMark05 and ~1300 in 3dMark06 ! :) I tried it with different versions of drivers, from 83.20 to 92.91. I have VSync off, Performance set to high, no AA or AF. I don't know exactly the clocks of the core and mem because coolbits doesn't work for me - I've read somewhere that Toshiba disabled that from bios (btw, if someone knows how to enable it I'd apreciate it :P ). I installed RivaTuner and it showed 350 for core and 400 for memory, but I'm not sure it detected them correctly. The same RivaTuner also says 64 bit for the Memory bus. Are there 7600s having a 64 bit Memory bus? This could explain the low scores, but I found no specs with this kind of bus... :) Anyway, if somebody found the cause (or a solution :( ) to the problem posted by Khan_Phelan please let me know. Thanks Quote Link to comment Share on other sites More sharing options...
Ice-Tea Posted September 29, 2006 Report Share Posted September 29, 2006 I have the same problem. I've got a Toshiba Satellite P100, Core Duo T2300, 1GB Ram and GF Go 7600 with 128 Mb. I get ~2100 points in 3dMark05 and ~1300 in 3dMark06 ! :) I tried it with different versions of drivers, from 83.20 to 92.91. I have VSync off, Performance set to high, no AA or AF. I don't know exactly the clocks of the core and mem because coolbits doesn't work for me - I've read somewhere that Toshiba disabled that from bios (btw, if someone knows how to enable it I'd apreciate it :P ). I installed RivaTuner and it showed 350 for core and 400 for memory, but I'm not sure it detected them correctly. The same RivaTuner also says 64 bit for the Memory bus. Are there 7600s having a 64 bit Memory bus? This could explain the low scores, but I found no specs with this kind of bus... :) Anyway, if somebody found the cause (or a solution :( ) to the problem posted by Khan_Phelan please let me know. Thanks I just finished testing a Go 7600. It has 475 core and 500 mem. 128bit mem bus. About as fast as a vanilla Go 6800 Quote Link to comment Share on other sites More sharing options...
mobilenvidia Posted September 30, 2006 Report Share Posted September 30, 2006 Some OEMs cripple the go7600 to help with battery life. I know of Compal HEL80 and probably the HGL30 as well where the VBIOS has lowered the clocks. Also the lower clocks disguised the the fact that DDR2 RAM was used not DDR3 making a big difference in memory speed. You need to find out your core and memory clocks as see if the match what Icetea has above which are the normal default that the go7600 is capable of. Quote Link to comment Share on other sites More sharing options...
mattias Posted October 1, 2006 Report Share Posted October 1, 2006 (edited) :) Edited October 1, 2006 by mattias Quote Link to comment Share on other sites More sharing options...
mattias Posted October 1, 2006 Report Share Posted October 1, 2006 (edited) I just finished testing a Go 7600. It has 475 core and 500 mem. 128bit mem bus. About as fast as a vanilla Go 6800 go6800 is a lot better then go7600 ! Ive tried both of them, and i thought go7600 was pretty much slower. Edited October 1, 2006 by mattias Quote Link to comment Share on other sites More sharing options...
The_Lead_Factor Posted October 2, 2006 Report Share Posted October 2, 2006 (edited) go6800 is a lot better then go7600 ! Ive tried both of them, and i thought go7600 was pretty much slower. Read: Some OEMs cripple the go7600 to help with battery life.I know of Compal HEL80 and probably the HGL30 as well where the VBIOS has lowered the clocks. Also the lower clocks disguised the the fact that DDR2 RAM was used not DDR3 making a big difference in memory speed. Edited October 2, 2006 by The_Lead_Factor Quote Link to comment Share on other sites More sharing options...
Guest mew905 Posted October 7, 2006 Report Share Posted October 7, 2006 try setting processor affinity to one processor, rather than both Quote Link to comment Share on other sites More sharing options...
Guest mew905 Posted October 9, 2006 Report Share Posted October 9, 2006 Hello there,I´ve got a brand new ACER ASPIRE 5652 WLMi feat. CORE DUO T2300, 2GB RAM DDR2, 100GB S-ATA and the new Geforce Go7600 with 128MB. When I run the 3DMark2005 Test, I only reach 2161 point!!! That´s not good for this hardware! A X700 with 128MB with a 750 processor reaches 2600 points! Some Go6600 reach 3000 points! What´s wrong with my system? I don´t understand it! Does anyone know, if there are problems with the Go7600??? Greetings from Germany Khan_Phelan That score is very low actually, a GeForce 6600GT AGP 4x on a Celeron 2.3GHz w/ 256MB PC2100 DDR memory scored me a grand total of about 3400 3DMarks. a GeForce FX 5200 scores maybe 800. Seeing as how it is 2005, it shouldnt have any problems with dual core but try setting affinity to one of the cores. I wont buy any dual core system except the PD805 for its overclock ability, due to the number of problems with them. the T2300 may be slowing down the video card however, as a video card can only render as fast as the processor can provide data. Quote Link to comment Share on other sites More sharing options...
trailmaker Posted October 10, 2006 Report Share Posted October 10, 2006 try setting processor affinity to one processor, rather than both Thanks for the tip, but it didn't help. I set the affinity on the 3dmark05 process but the score didn't increase. I even disabled the second core from bios, the result was the same. Quote Link to comment Share on other sites More sharing options...
Guest comanda Posted October 13, 2006 Report Share Posted October 13, 2006 ists normal for the 7600go 128mb because it only has a 64bit memory interface noz a 128bit. i get 14000points in 3dmark01 5000 in 03 2000 in 05 and 1400 in 06 Quote Link to comment Share on other sites More sharing options...
Fabrice Roux Posted October 13, 2006 Report Share Posted October 13, 2006 The 7600 Go has a 128 bits memory bus. It's the 7300 and 7400 that have a 64 bits wide bus. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.