Jump to content
LaptopVideo2Go Forums

About the standby issue...


Recommended Posts

Ok so I've read all the topic in here concerning the black screen resume problem from standby mode...

My chipset is NV17 DEV_ID 0175

So i've set the MapOSD3ToNV to 2, like specified in the different posts (NV11 to NV18 should set it to 2).

But when I do that, the options to activate standby or hibernation disappear...

When I go back to MapOSD3ToNV = 3, the options come back...

Really confusing !!

What should I do ? :)

Link to comment
Share on other sites

Ok so really strange issue :

When i put MapOSD3ToNV = 2 in the .inf file, it doesn't work at all, I don't have access to StandBy or Hibernate modes.

When I install the driver with MapOSD3ToNV = 3 and then modify all the occurences of it to 2 in the registry, it works like a charm...


For info, I use :

Toshiba Satellite 2450-S203

Nvidia GeForce4 420 Go 32 Mb (NV17, DEV_ID 0175)

laptopvideo2go drivers 78.05 with corresponding .inf

Windows XP SP2

Toshiba Common Modules installed.

Can be useful if someone has the same problem !

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...