mobilenvidia Posted October 4, 2007 Report Share Posted October 4, 2007 Below are the modded Atheros drivers to enable all known settings. The modded drivers contain the NMI/Parity error fix mentioned below. After weeks of testing, tweaking and reinstalling Windows, I've found the culprit to the NMI:Parity error for Atheros cards on some systems (well at least the i9400 anyway) Below is the latest driver with a modded INF that includes the fix and has everything enabled. DO NOT adjust pcieaspm setting to either 1 or 3 !! this could possibly cause the error to happen again (not the actual fix but part of it) Just extract the driver somewhere and use the update driver method to install. If s previous driver is installed remove this and if it auto detects an older one then remove this as well, do this until it no longer installs a driver. Reboot after the uninstall then point the new 'hardware found' to the directory where the modded driver is. Once installed reboot again. v9.2.0.105 with modded INF v1.31 for both Vista/Win7 x86 and x64 Should work for ALL Atheros Chipset versions v9.1.0.314 with modded INF v1.30 for both Vista/Win7 x86 and x64 Should work for ALL Atheros Chipset versions v9.1.0.100 with modded INF v1.30 for both Vista/Win7 x86 and x64 Should work for ALL Atheros Chipset versions v8.0.0.316 with modded INF v1.29 for both Vista/Win7 x86 and x64 Should work for ALL Atheros Chipset versions v9.0.0.125 with modded INF v1.29 for both Vista/Win7 x86 and x64 Should work for ALL Atheros Chipset versions v8.0.0.279 with modded INF v1.29 for both Vista/Win7 x86 and x64 Should work for ALL Atheros Chipset versions v7.7.0.449 with modded INF v1.29 for both Vista/Win7 x86 and x64 Should work for ALL Atheros Chipset versions v8.0.0.225 with modded INF v1.29 for both Vista/Win7 x86 and x64 Should work for ALL Atheros Chipset versions v8.0.0.219 with modded INF v1.28 for both Vista/Win7 x86 and x64 Should work for ALL Atheros Chipset versions v7.7.0.384 with modded INF v1.28 for both Vista/Win7 x86 and x64 Should work for ALL Atheros Chipset versions v8.0.0.171 with modded INF v1.28 for both Vista/Win7 x86 and x64 Should work for ALL Atheros Chipset versions v2.0.0.73 with modded INF v1.28 for both vista and Windows 7 x64 only Should work for ALL Atheros Chipset versions v8.0.0.144 with modded INF v1.28 for both Vista/Win7 x86 and x64 Should work for ALL Atheros Chipset versions v7.7.0.319 with modded INF v1.28 for both Vista/Win7 x86 and x64 Should work for ALL Atheros Chipset versions v2.0.0.72 with modded INF v1.28 for both vista and Windows 7 Should work for ALL Atheros Chipset versions v7.7.0.259 with modded INF v1.26 for both WinXP x86 and x64 Should work for ALL Atheros Chipset versions v7.7.0.233 with modded INF v1.24 for both WinXP x86 and x64 Should work for ALL Atheros Chipset versions v7.7.0.231 with modded INF v1.24 for both Vista x86 and x64 Should work for ALL Atheros Chipset versions v2.0.0.70 with modded INF v1.26 for both vista and Windows 7 Should work for ALL Atheros Chipset versions v7.6.1.221 with modded INF v1.26 for both WinXP x86 and x64 Should work for ALL Atheros Chipset versions v7.6.1.204 with modded INF v1.26 for both Vista x86 and x64 Should work for ALL Atheros Chipset versions v7.6.1.184 with modded INF v1.24 for both WinXP x86 and x64 Should work for ALL Atheros Chipset versions v7.6.1.204 with modded INF v1.23 for both Vista x86 and x64 Should work for ALL Atheros Chipset versions v7.6.1.184 with modded INF v1.23 for both WinXP x86 and x64 Should work for ALL Atheros Chipset versions v7.6.1.162 with modded INF v1.20 for both Vista x86 and x64 Should work for ALL Atheros Chipset versions v7.6.1.170 with modded INF v1.21 for both WinXP x86 and x64 Should work for ALL Atheros Chipset versions v7.6.1.122 with modded INF v1.20 for both Vista x86 and x64 Should work for ALL Atheros Chipset versions v7.6.1.122 with modded INF v1.19 for both Vista x86 and x64 Should work for ALL Atheros Chipset versions v7.6.0.172 with modded INF v1.19 for both Vista x86 and x64 Should work for ALL Atheros Chipset versions v7.6.0.83 with modded INF v1.17 for both Vista x86 and x64 Should work for ALL Atheros Chipset versions v7.3.1.109 with modded INF v1.15 for both Vista x86 and x64 Should work for ALL Atheros Chipset versions Feedback is encouraged, would be nice to know it fixes the problem for other INF version changes v1.11 original release based on other modded INF v1.12 added support for all Atheros Chipsets Changed the mode options to just 11a, 11bg or auto, setting should allow for legacy devices and 11n in 40 and 20Mhz modes Added manual transmit speeds for 11a, 11g and 11b only needed for legacy routers if ever at all. Now supports full 3x3 aerial mode Set Receive buffers to max Fixed LED's for Gigabyte, hopefully this doesn't break it for other devices, should have a slow blink not connected and a solid LED for connected. Added Sleep mode Fixed Transmit power v1.13 Removed all legacy commands from INF, these were causing slow surfing Leaving essential tweaks still adjustable in device properties. Set powersave feature to off and also turned off pcieaspm (these can be turned on, but pcieaspm to on.on gives me parity error) v1.14 Removed the Netband settings couldn't get this to work 100%, driver will automatically choose fastest link speed, but can no longer force a slower one v1.15 Added 'Force Wake' enable to stop the WLAN card from going into lower power state mode, this makes a big difference to performance Also fixes the slowness this driver had with the Gigabyte WI06N WLAN card. Changed the LED to slow flash at no connection, solid during connection, once connected the flashing will speed up with rate of data send/received remove these 2 lines from INF if this is not what you want and you prefer v1.13 version: HKR, ,softLEDEnable,0x00002, "1" HKR, ,swapDefaultLED,0x00002, "1" v1.16 Minor LED fix v1.17 Added support for the 928x Chipset v1.18 Reworked the INF completely, added support for the 922X/928X chipsets. v1.19 Fixed 92XX install bug :) v1.20 Added lots more tweakble features in the Device Properties to play with. Set Receive buffers to 256 v1.21 Fixed Win XP lack of 'Advanced Properties' v1.22 Pre 11n cards no longer can change the speed settings (most were 11n anyway) v1.23 Changed name for AR928x to include AR5009 (half height version) and AR5BH92 v1.24 Added Adhoc channel select to the INF, thanks to ElectriX Fixed driver install issue v1.25 Added, dynamic MIMO power save and Adhoc 11n settings to control panel. v1.26 Added support for the new AR chipsets and also a couple of missing older ones. v1.27 Modded 2.0.0.72 to enable Windows 7 Microsoft Virtual WiFi Miniport Adapter v1.28 Fixed 32bit OS error with v1.27 v1.29 Added 'Atheros IHV Service' support v1.30 Added support for new AR938x Chipset (BT also on card) v1.31 Added support for Green TX, and AR9485 chipset with Blutooth Quote Link to comment Share on other sites More sharing options...
mobilenvidia Posted October 4, 2007 Author Report Share Posted October 4, 2007 Hmmm, the LED doesn't work at all with the Gigabyte WI06 :) It did work with the Sparklan. Can't seem to enable the LED's at all :) Quote Link to comment Share on other sites More sharing options...
mobilenvidia Posted October 5, 2007 Author Report Share Posted October 5, 2007 Numerous fixes as per v1.12 see above for details. Quote Link to comment Share on other sites More sharing options...
BlackSeal84 Posted October 7, 2007 Report Share Posted October 7, 2007 Thanks mate, I really appreciate your efforts and they couldn't have come at a better time! I just order last week the SparkLAN card (Mini PCI) and Gigabyte card (Mini card) AGN cards for my newer and older laptop, as well as an extra internal antenna for the older machine (Dell Inspiron 9300). I grabbed em both from Oxford Tech who I previously bought a Super G mini card by Gigabyte (AR 5005G) as well as their excellent Gigabyte Super mini PCI A/G card (AR5006XS). I am currently running Intel's AGN mini card in my XPS and it will be interesting to do some testing between the two cards once I get my hands on a n based router. I noted the model you quoted from D Link (DIR 855) and am waiting for that one to come out since it will feature an Atheros chipset. Whilst you have the newest driver and awesome modded inf posted, here's another good Atheros driver source: ftp://lizzi555.dyndns.org/Download/WLAN/Atheros/ Thanks! Quote Link to comment Share on other sites More sharing options...
mobilenvidia Posted October 7, 2007 Author Report Share Posted October 7, 2007 No worries, the Gigabyte is working good with the modded INF. Am now trying to get the Sparklan to do the same, am making very slow progress with this card. Lizzi555 yes I've been there, excellent site for older chipsets. Quote Link to comment Share on other sites More sharing options...
mobilenvidia Posted October 12, 2007 Author Report Share Posted October 12, 2007 v1.15 added, tested on Gigabyte works OK This is probably the best I can do for these drivers. Not ideal but it should give decent file transfer speeds. Quote Link to comment Share on other sites More sharing options...
debaucher Posted October 12, 2007 Report Share Posted October 12, 2007 Great work man. You are the inf modding KING!!!!!!!!!!!! D. Quote Link to comment Share on other sites More sharing options...
mobilenvidia Posted October 14, 2007 Author Report Share Posted October 14, 2007 What else would I be doing ? Just tried to install MacOSX and a no go with the Gigabyte WI06N. OSX doesn't recognise the the card, so no WIFI, no WIFI = no MacOS for me. May give it another go with the Sparklan as this uses the reference Atheros chipset/board Quote Link to comment Share on other sites More sharing options...
Guest Guest Posted October 15, 2007 Report Share Posted October 15, 2007 Thanks alot for the INF! It works under 802.11N but I cannot connect to a 802.11b network? Is there a way to fix that? Quote Link to comment Share on other sites More sharing options...
mobilenvidia Posted October 16, 2007 Author Report Share Posted October 16, 2007 I can hook up just fine with 11b, typing this now with 11b. I've set the router to only send 11b, 11Mbps this is so yesterday :) If I try to force the WLAN card to only use 11b it gives BSOD (not a parity error) What you could try doing is set the Antenna switch to 'B' not 'Auto' or try 'A'. I have issues some times with logging in to the router with it set to 'auto' and 'B' works much better. The modded driver has the Antenna switch in the device properties. Quote Link to comment Share on other sites More sharing options...
Guest Bence Zahalka Posted October 16, 2007 Report Share Posted October 16, 2007 hi, i have an atheros ar5212a-00 (driver says: ar5002g, but i have found on it the PW-8660AS name) minipci card. if i install this driver xp says: error code 39, something is missing. if i install other driver then nmi:parity error... in the driver folder i have these files: athr.pdb athr.sys athrext.cat netathr.inf athrx.pdb athrx.sys athrextx.cat netathrx.inf what is missing? how can i get it to work? Quote Link to comment Share on other sites More sharing options...
mobilenvidia Posted October 16, 2007 Author Report Share Posted October 16, 2007 I can't guarantee compatability with older chipsets. It obviously installed OK but the driver won't start, this is probably maybe as the INF is setup for 11n where as your card is not. Try changing the receive buffers then transmit buffers then map registers down to around '64' if the device properties will let you. Also edit the INF and take out the 5416_antenna section then reinstall driver. Quote Link to comment Share on other sites More sharing options...
Guest Guest Posted October 17, 2007 Report Share Posted October 17, 2007 I tried both antenna modes, it still won't connect. It is an unscecured wireless b network but the card will connect and work fine to a wireless g or n network. I am using the Sparklan AR5008 based minipci card on Vista. It works under OS X on b/g/n but not vista... Quote Link to comment Share on other sites More sharing options...
mobilenvidia Posted October 17, 2007 Author Report Share Posted October 17, 2007 It might be a SP1 fix, as I this is what I'm using as my main OS Vista x64 SP1 beta. I've not tried it with the Spaklan 5008X card, yet which is similar to the Gigabyte, but has it's very own issues. Quote Link to comment Share on other sites More sharing options...
Guest Guest Posted October 17, 2007 Report Share Posted October 17, 2007 It is interesting: It works on b if I use the 7.2.0.179 driver but that will not allow me to connect to a n connection and it is very unstable on b/g networks (Dissconnects alot) Quote Link to comment Share on other sites More sharing options...
mobilenvidia Posted October 18, 2007 Author Report Share Posted October 18, 2007 What have you got that is still on 11b ? I have never had any 11b devces and I've been a WIFI freak for some years now Quote Link to comment Share on other sites More sharing options...
Guest Guest Posted October 18, 2007 Report Share Posted October 18, 2007 Its a router that is 802.11b, I was able to connect to it with my intel 2915 card and now I cant connect to it with this card.. the funny thing is that in OS X 10.4.6 it works fine. Quote Link to comment Share on other sites More sharing options...
mobilenvidia Posted October 18, 2007 Author Report Share Posted October 18, 2007 Although it should connect with 11b, it might be time for an upgrade to anything but 11b Done some work on the netband settings, add the following to the INF some where in the [11n] section (do not into the [blabla] section or it won't run HKR, Ndi\params\wModeSelect, ParamDesc, 0, %wModeSelect% HKR, Ndi\params\wModeSelect, Base, 0, "10" HKR, Ndi\params\wModeSelect, default, 0, "130671" HKR, Ndi\params\wModeSelect, type, 0, "enum" HKR, Ndi\params\wModeSelect\enum, "4", 0, %wModeLegacy11bonly% HKR, Ndi\params\wModeSelect\enum, "3", 0, %wModeLegacy11a% HKR, Ndi\params\wModeSelect\enum, "28", 0, %wModeLegacy11bg% HKR, Ndi\params\wModeSelect\enum, "31", 0, %wModeLegacy11abg% HKR, Ndi\params\wModeSelect\enum, "2052", 0, %wModeSelect11bonly% HKR, Ndi\params\wModeSelect\enum, "4099", 0, %wModeSelect11na% HKR, Ndi\params\wModeSelect\enum, "2076", 0, %wModeSelect11nbg% HKR, Ndi\params\wModeSelect\enum, "6175", 0, %wModeSelect11abgn% HKR, Ndi\params\wModeSelect\enum, "130671", 0, %wModeSelect11abgn40% HKR, Ndi\params\wModeSelect\enum, "104003", 0, %wModeSelect11na40% HKR, Ndi\params\wModeSelect\enum, "26668", 0, %wModeSelect11nbg40% HKR, Ndi\params\wModeSelect\enum, "26628", 0, %wModeSelect11bonly40% As you can see from the above there are 3 distinct range of settings, the first lot (3,4,28,31) are legacy 11abg or the old standard. 2nd lot are for up to 130Mbps connection or max for 20Mhz bandwidth and the 3rd lot are for 11n (40Mhz, 300Mbps) The default is 40Mhz 11abgn, try this first. Failing this set the device to legacy 11b and work your way up. Should legacy 11b not work then there is a driver problem with old 11b Hope this works, may even play with the above my self to see how these settings affect things. Quote Link to comment Share on other sites More sharing options...
mobilenvidia Posted October 18, 2007 Author Report Share Posted October 18, 2007 When in Legacy mode: Set antenna switch to either A or B (I get slightly higher signal from using A) I assume Legacy mode only uses 1x1 antenna receive/transmit Setting Antenna switch to Auto (default) means I cannot connect to router. Setting to legacy 11b only, causes a BSOD (not parity error) this is for me, you might not as your router is 11b only anyway. If I want 11b mode only I have to set the router to this mode. Quote Link to comment Share on other sites More sharing options...
Guest Guest Posted October 19, 2007 Report Share Posted October 19, 2007 Thanks alot! Your great with drivers! I set it to 11bgn 40mhz and now it works just fine. Quote Link to comment Share on other sites More sharing options...
BlackSeal84 Posted October 19, 2007 Report Share Posted October 19, 2007 Awesome thanks for the updates. Just installed my Gigabyte WI06 mini card last night, updating to your 1.15 inf driver now. No N class router yet but it does work at least with my WRT54G. Also installed the Spark LAN mini PCI in my i9300 by adding an extra antenna from Oxford Tec. ATM the Spark Lan on the XP based i9300 gets slightly better throughput than the Gigabyte under Vista, 21Mbps vs. 18Mbps at 8 meters or so and one cinder block wall. I am eager to compare the Gigabyte and Spark LAN cards against the Intel 4965AGN I have once I get my hands on a new router. Quote Link to comment Share on other sites More sharing options...
mobilenvidia Posted October 19, 2007 Author Report Share Posted October 19, 2007 Don't forget to get an 11abgn router as the i4965 only does 11n (300Mbps) in 11a band, 11g maxes out at 144Mbps Quote Link to comment Share on other sites More sharing options...
BlackSeal84 Posted October 21, 2007 Report Share Posted October 21, 2007 Cool thanks for the info, didn't know that. I know the 4965 is Draft 1.0, whereas the Gigabyte card is Draft 2.0 I believe. I have my eye on the D Link router you suggested once it is available. I'm going to migrate my network to gigabit on the wired side to, so as to ensure best performance to the WLAN. I have one switch (Netgear GS105) and am going to get one more to have all my rooms connected via gigabit. Quote Link to comment Share on other sites More sharing options...
sgalbincea Posted October 22, 2007 Report Share Posted October 22, 2007 I registered just to thank you for this driver! I have a i6400 with a SparkLAN AR5006EX chip and have had that NMI issue intermittently forever! I am testing out Vista x64 on my laptop and have used your latest 1.15 driver inf, so I guess we will see what happens. I am also so glad to have the functionality of my WiFi LED back as well man. Keep up the good work and I will let you know if I experience any issues, but none so far! Thanks again and God bless you. Quote Link to comment Share on other sites More sharing options...
mobilenvidia Posted October 22, 2007 Author Report Share Posted October 22, 2007 No worries, someone had to do it, no one else put their hand up so I drew the short straw. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.