Roseweave Posted June 27, 2008 Report Share Posted June 27, 2008 I was looking at the benchmarks ere - and it says he memory clock for the 9500M GS should be 700MHz. However GPU-Z lists it as only 400 Mhz. What's going on? Quote Link to comment Share on other sites More sharing options...
Michael Marley Posted June 27, 2008 Report Share Posted June 27, 2008 This could be because PowerMizer is throttling down your GPU clock. Try running a 3D application at the same time as you look at the clock speed and see if it goes up. Quote Link to comment Share on other sites More sharing options...
Roseweave Posted June 27, 2008 Author Report Share Posted June 27, 2008 (edited) No, it doesn't go up. GPU-Z says it's the default speed too. Edited June 27, 2008 by Roseweave Quote Link to comment Share on other sites More sharing options...
Dox Posted June 27, 2008 Report Share Posted June 27, 2008 its running at 800MHZ effectively :) Quote Link to comment Share on other sites More sharing options...
Roseweave Posted June 27, 2008 Author Report Share Posted June 27, 2008 Howso? I'm confused. Quote Link to comment Share on other sites More sharing options...
Michael Marley Posted June 27, 2008 Report Share Posted June 27, 2008 I am so sorry. I thought you were talking about GPU clock. With memory clock, the clock reported by GPU-Z is the clock which is sent to the memory. Because the memory is DDR/GDDR3 (which stands for Double Data Rate) the effective clock of the memory (and therefore what is advertised) is twice what you see in GPU-Z. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.