flashing Problem with C90 8600GT to FSC M3438G

[masterandy]

I have a "bin" File from techpowerup.com. Tell me why .....bin??? not a rom file for nvflash

http://www.techpowerup.com/vgabios/1742/Ac...512.070423.html

an the new Version from Nflash Version 5.57

I am create a bootdisk for external Floppy with a autoexec.bat

dir > out1.txt

nvflash --list > out2.txt

nvflash -r > out3.txt

nvflash -c > out4.txt

nvflash -b diag.rom

nvflash -k diag.rom > out5.txt

nvflash -4 -5 -6 -A -y Acer.8600MGT.512.070423.bin > out6.txt

The Notebook booting from floppy with many beeps (2 beeps). 1 minutes later end of the working disk a black screen...

The Laptop booting normaly in windows with black screen.

When i plug a external VGA Adapter in this book, i see the Desktop of external Monitor. when i plug the old card 6800 i see

immediately the bios an the windows desktop.

Sorry for my english...can you help me???

My book is a 17" the Asuscard is a C90 card designed for a 15"Book . is this problem cause??

Special thanxxxxxx

Edited October 9, 2008 by masterandy

[aliveanddead86]

The flash was a bad flash, you need to blind flash your card back to the original BIOS. The .bin file you downloaded may not have been correct, hence why you get the black screen.

I have also experienced the same problem before, the only way around it is to blind flash it back. Try this link http://www.notebookforums.com/thread181387.html

[masterandy]

The flash was a bad flash, you need to blind flash your card back to the original BIOS. The .bin file you downloaded may not have been correct, hence why you get the black screen.

I have also experienced the same problem before, the only way around it is to blind flash it back. Try this link http://www.notebookforums.com/thread181387.html

Thanxxx :)

I have following output...

NVIDIA Firmware Update Utility (Version 5.50)

NVIDIA display adapters present in system:

No NVIDIA display adapters found.

I think the C90 is not compatible with FSC M3438G... :)

or have another idea??