Jump to content
LaptopVideo2Go Forums

Transform quadro fx go1400 to geforce 6800go


wickerman

Recommended Posts

unsure as to what you mean.

You can install a driver with the have disk method, and specify that you have the 6800m card as opposed to the FX1400 card.

But it will perform the same as essentially its the same card.

Link to comment
Share on other sites

unsure as to what you mean.

You can install a driver with the have disk method, and specify that you have the 6800m card as opposed to the FX1400 card.

But it will perform the same as essentially its the same card.

This is what I am talking about look at this link notebook check.

It shows that it is a little slower then geforce 6800go and if you use modded driver it will transform into a geforce 6800go. Making just as fast as the 6800go.

I saw in another forum you can use rivatuner for this but it doesnt tell you how. Does somone know how to do this?

Link to comment
Share on other sites

Here's howto do it the other way round (quick googling):

USING RIVATUNER TO INSTALL NVSTRAP DRIVER,

USING NVSTRAP TO CHANGE "GEFORCE" TO "QUADRO"

6. To do that, start RivaTuner again.

On the "Main" tab,

in the "Target adapter" field,

click the little button with an arrow, just to the right of

".................. Customize..."

Click the left-most icon on the pop-up toolbar;

"Low-level system settings"

In the new window called "Low-level system tweaks",

choose the "NVStrap driver" tab.

Click "Install" button.

Now the previously "greyed-out" roll-down menues become available.

In the "PCI DeviceID settings" field, there is one roll-down menu

- "Graphics adapter identification".

Select "Quadro".

Set a checkmark in the

"Use ROM straps for PCI DeviceID programming"

Click "Apply" button

Click "OK" button.

Now the PC need to reboot, click "OK" on the reboot dialog box.

Link to comment
Share on other sites

Here's howto do it the other way round (quick googling):

USING RIVATUNER TO INSTALL NVSTRAP DRIVER,

USING NVSTRAP TO CHANGE "GEFORCE" TO "QUADRO"

6. To do that, start RivaTuner again.

On the "Main" tab,

in the "Target adapter" field,

click the little button with an arrow, just to the right of

".................. Customize..."

Click the left-most icon on the pop-up toolbar;

"Low-level system settings"

In the new window called "Low-level system tweaks",

choose the "NVStrap driver" tab.

Click "Install" button.

Now the previously "greyed-out" roll-down menues become available.

In the "PCI DeviceID settings" field, there is one roll-down menu

- "Graphics adapter identification".

Select "Quadro".

Set a checkmark in the

"Use ROM straps for PCI DeviceID programming"

Click "Apply" button

Click "OK" button.

Now the PC need to reboot, click "OK" on the reboot dialog box.

I dont want a quadro I want geforce. I have quadro fx go1400 and I want it to become geforce 6800go.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...