Jump to content
LaptopVideo2Go Forums

WhiteTigerX7's HP/Compaq/VoodooPC INF (For Vista 32bit Only)


whitetigerx7

Recommended Posts

  • 1 year later...
  • Replies 102
  • Created
  • Last Reply

Top Posters In This Topic

  • whitetigerx7

    34

  • zachthurston

    7

  • Evan186

    3

  • ®®®

    2

Top Posters In This Topic

Posted Images

Guest Bodhisatya Sen

This driver is for all HP/Compaq/VoodooPC laptop systems using Nvidia graphics hardware.

===========================================================================

Important!! Read 1st or regret it later!!!

===========================================================================

Only install this driver on one of the following series of Laptops:

Hewlett-Packard

Compaq

Voodoo PC

Installation on other systems may not work or may leave product severely crippled.

Driver is based off 177.98 driver released in the LaptopVideo2Go driver section and is recommended for all graphics

cards and chipsets covered by this INF.

This driver is SLI compatible for non-nForce SLI chipsets such as the Intel 915/945/965 chipsets using the n100 PCIE

bridge chip.

Control Panel will require setting to "CUSTOM" and will require sections to be individually enabled to gain maximum

control over the graphics adapter.

nTune 6.02 is recommended for this driver release for additional Tweaking and Overclocking.

nHancer 2.4.1 is currently tested for maximizing the abilities of the SLI profiles, as well as unlocking a few extra

features.

The GeForce 174.76-STEREO driver may be used in conjunction with this driver for expanded capabilities for laptops with

video output supporting 3D Visualization Goggle Technology.

The Nvidia PhysX 8.09.04 driver may be used in conjunction with this driver and is recommended for chipsets

with integrated PhysX processing of various GeForce series cards.

This INF does NOT install the Nvidia HDMI HD-Audio driver. You will need to manually install this driver separately.

===========================================================================

What's new:

===========================================================================

Prior to install you MUST edit the INF at the following tweak (For TurboCashe users only):

HKR,, D3D_92521178, %REG_DWORD%, 0 ; Enable PCI Texture Memory Limit Size of XX MB*

If your card supports 128mb of RAM set the maximum size to 128mb. Do not attempt to set the maximum size to

256mb. You will run out of RAM if the system uses the extra RAM and it will cause instabilities with the system. Set this

tweak to match exactly the amount of memory you have allocated or have included with the graphics chip.

This setting does not effect users with Integrated chip-on-chip GPU systems or stand-alone GPU systems with

dedicated RAM. Users of these systems may leave this setting at "0" without issue.

Added several new product codes for Hardware and Subsys IDs.

===========================================================================

Release Notes:

===========================================================================

These drivers are the most up to date and should be compatible with all current listed graphics cards and chips

listed as supported in the INF. DO NOT ASK IF THIS IS THE BEST DRIVER!!! YOU WILL BE IGNORED!!!

Open the driver folder after extracting to your desktop and copy this INF to the driver folder overwriting the existing

INF and run the "SETUP.EXE" located inside. The driver will begin installation. You may be asked to verify if the

driver can be installed as it is a non-certified driver by Windows. Just click the "Install this driver" and the driver will

be installed.

I HIGHLY recommend you Disable or Turn Off the Windows Vista "User Access Control" system before attempting

installation of this driver. You can choose to re-enable it afterwards.

===========================================================================

To Do:

===========================================================================

Collect new releases from HP/Compaq for comparison against current chipsets for extra hardware and Subsystem ID

tags currently unknown and properly label existing chipsets.

===========================================================================

Coming in next release:

===========================================================================

I apologize for the infrequent updates, however it is due to the fact that Nvidia has been leaking many new drivers

lately to the public and I have not had enough time jumping between the latest sets to find the most up to date and

stable drivers for everyone to use.

Add in missing GPU labels currently unknown in the INF.

It appears VoodooPC is no longer supporting Nvidia graphics processors in their current line of Envy Laptops. They

instead have chosen to support Intel only graphics to adhere to the strict guild lines of the Centrino specification of the

Intel Corporation. Due to the fact many older units still support Nvidia graphics, support will continue for VoodooPC

products.

===========================================================================

Link to comment
Share on other sites

Guest Bodhisatya Sen

I need help for my Laptop,

I am unable to play Rainbow Vegas2. As the GeForce go 6150 is killing it even after sharing 128 MB through Bios. Detailed info about my laptop given below. Can any one help me how to sot this problem out..Be it through a tweaked driver, or by using 3D Analyser - which i tried but it didnt work out.

I am sorry for this long a post, it just reflects my frustration of not being able to enjoy my games....Will be truely indebt to a person who can pull me out of this feeling of helplessness......I dont know much about computers...

Please help & reply me back at getu32@gmail.com

Number of Processors = 2

========== CPUID Info ==========

Processor 0:

Brand = AMD Turion 64 X2 Mobile Technology TL-60

Family = 15

Model = 8

Stepping = 2

L1 Instr Cache Size = 65536

L1 Data Cache Size = 65536

L2 Cache Size = 524288

L3 Cache Size = 0

Feature flags:

CPUID 00000001[edx]=0x178bfbff:

fpu : Processor supported vme : Processor supported

de : Processor supported pse : Processor supported

msr : Processor supported pae : Processor supported

mce : Processor supported cx8 : Processor supported

apic : Processor supported sep : Processor supported

mtrr : Processor supported pge : Processor supported

mca : Processor supported cmov : Processor supported

pat : Processor supported pse36 : Processor supported

cflush : Processor supported ds : No processor support

acpi : No processor support mmx : Processor supported

fxsr : Processor supported sse1 : Processor supported

sse2 : Processor supported ss : No processor support

htt : Processor supported tm : No processor support

sbf : No processor support

CPUID 00000001[ecx]=0x00002001:

tm2 : No processor support est : No processor support

cid : No processor support sse3 : Processor supported

CPUID 80000001[edx]=0xebd3fbff:

fpu : Processor supported vme : Processor supported

de : Processor supported pse : Processor supported

tsc : Processor supported msr : Processor supported

pae : Processor supported mce : Processor supported

cx8 : Processor supported syscall : Processor supported

mtrr : Processor supported pge : Processor supported

mca : Processor supported cmov : Processor supported

pat : Processor supported pse36 : Processor supported

mp : No processor support nx : Processor supported

ammx : Processor supported mmx : Processor supported

fxsr : Processor supported lm : Processor supported

x3dnow : Processor supported 3dnow : Processor supported

========== Operating System Information ==========

Microsoft Windows Vista Starter Edition, 32-bit Service Pack 1, Build 6001

========== Motherboard Information ==========

Motherboard Vendor: Not reported

Motherboard Version: Not reported

Motherboard Model: Not reported

========== DirectX version Information ==========

DirectX 10.0 (6.0.6000.16386)

========== Driver Version Information ==========

Nforce Driver Package version Not reported

Audio Driver Not reported

Graphics Driver 98.15 (7.15.10.9815)

Ethernet Driver 65.55 (1.00.01.06555)

IDE Driver 9.92 (5.10.2600.0992)

nTune 6.05.23

========== Processor, Bus, and Memory Speed Information ==========

CPU Speed = 2009.589

CPU Multiplier = 10.000

HT Bus Frequency = 200

Memory Frequency = 800.000

PCIE Frequency = 2500

tRas = 18

tRcd = 6

tRp = 6

tRc = 25

tWr = 6

tRrd = 3

tRwt = 4

tWtr = 3

tWrrd = 0

tWrwr = 2

tRdrd = 2

tRef = 7.8 us

========== GeForce Information ==========

GPU 1: GeForce Go 6150

GPU 1 Video BIOS version: 5.51.28.53.15

========== GPU's Core and Memory Speed Information ==========

GPU Core Speed = 425

========== Processor and System's Temperature Information ==========

CPU Temperature = Not Reported

System Temperature = Not Reported

GPU 0 Temperature = 68 C

========== Memory SPD Information ==========

Memory Dimm 0 (0x50)

Memory type: DDR2 SDRAM

Error correction: NONE

Data width: 64 bits

Number of physical banks: 2 (double sided)

Number of logical banks: 8

Number of row addresses: 14 14

Number of col addresses: 10 10

Bank density: 1024 1024 MB

Primary RAM Width: 8 8 bits

Error checking RAM Width: 0 0 bits

Module density: 2048 MB

Refresh rate: 7812.500 us

Self-refresh: Yes

Burst lengths supported: 4 8

CAS 4.0:

Cycle time (tCYC) = 3.000 ns fMax = 333.333 MHz

Access time (tAC) = 0.450 ns fMax = 2222.222 MHz

CAS 5.0:

Cycle time (tCYC) = 2.500 ns fMax = 400.000 MHz

Access time (tAC) = 0.400 ns fMax = 2500.000 MHz

Min delay, Bk/Bk random cols: 0 clocks

Min row precharge time (tRP): 15.000 ns

Min row active delay (tRRD): 7.500 ns

Min RAS to CAS delay (tRCD): 15.000 ns

Min Actv to precharge (tRAS): 45.000 ns

Addr/Cmd setup time: 0.170 ns

Addr/Cmd hold time: 0.250 ns

Data setup time: 0.050 ns

Data hold time: 0.120 ns

Write recovery time (tWR) 15.000 ns

Int Wr to Rd Cmd Dly (tWTR) 7.500 ns

Int Rd to Pchg Cmd Dly (tRTP) 7.500 ns

Min Act/Auto-Rfrsh Time (tRC) 60.000 ns

Min Auto-Rfrsh/Act Cmd (tRFC) 127.500 ns

Max Dev Cycle time (tCK max) 8.000 ns

Max DQS-DQ Skew (tDQSQ max) 2.000 ns

Rd data hold skew Fctr (tQHS) 3.000 ns

PLL relock time 0.000 ns

Memory analysis probe chars: 00

DIMM type: SO-DIMM (module width = 67.6mm)

FET switch external enable: No

Analysis probe installed: No

Includes weak driver: Yes

Manufacturer's JEDEC ID code: 00000000 000000ad

Module manufacturing location: 1 (manufacture dependant)

Module part number: HYMP125S64CP8-S6

Module revision code: 16705 (manufacture dependant)

Module manufacturing date: Wk 11 of 2009

Module serial number: 54420004

========== NVIDIA PCI Device Information ==========

NVIDIA Device At PCI Bus 0x0 Device 0x0 Function 0x0:

Vendor ID = 0x10de DeviceID = 0x02f0

NVIDIA Device At PCI Bus 0x0 Device 0x0 Function 0x1:

Vendor ID = 0x10de DeviceID = 0x02fa

NVIDIA Device At PCI Bus 0x0 Device 0x0 Function 0x2:

Vendor ID = 0x10de DeviceID = 0x02fe

NVIDIA Device At PCI Bus 0x0 Device 0x0 Function 0x3:

Vendor ID = 0x10de DeviceID = 0x02f8

NVIDIA Device At PCI Bus 0x0 Device 0x0 Function 0x4:

Vendor ID = 0x10de DeviceID = 0x02f9

NVIDIA Device At PCI Bus 0x0 Device 0x0 Function 0x5:

Vendor ID = 0x10de DeviceID = 0x02ff

NVIDIA Device At PCI Bus 0x0 Device 0x0 Function 0x6:

Vendor ID = 0x10de DeviceID = 0x027f

NVIDIA Device At PCI Bus 0x0 Device 0x0 Function 0x7:

Vendor ID = 0x10de DeviceID = 0x027e

NVIDIA Device At PCI Bus 0x0 Device 0x2 Function 0x0:

Vendor ID = 0x10de DeviceID = 0x02fc

NVIDIA Device At PCI Bus 0x0 Device 0x3 Function 0x0:

Vendor ID = 0x10de DeviceID = 0x02fd

NVIDIA Device At PCI Bus 0x0 Device 0x5 Function 0x0:

Vendor ID = 0x10de DeviceID = 0x0244

NVIDIA Device At PCI Bus 0x0 Device 0x9 Function 0x0:

Vendor ID = 0x10de DeviceID = 0x0270

PCI Config Space Register Value for This Device

NVIDIA Device At PCI Bus 0x0 Device 0xa Function 0x0:

Vendor ID = 0x10de DeviceID = 0x0260

NVIDIA Device At PCI Bus 0x0 Device 0xa Function 0x1:

Vendor ID = 0x10de DeviceID = 0x0264

NVIDIA Device At PCI Bus 0x0 Device 0xa Function 0x3:

Vendor ID = 0x10de DeviceID = 0x0271

NVIDIA Device At PCI Bus 0x0 Device 0xb Function 0x0:

Vendor ID = 0x10de DeviceID = 0x026d

PCI Config Space Register Value for This Device

NVIDIA Device At PCI Bus 0x0 Device 0xb Function 0x1:

Vendor ID = 0x10de DeviceID = 0x026e

NVIDIA Device At PCI Bus 0x0 Device 0xd Function 0x0:

Vendor ID = 0x10de DeviceID = 0x0265

NVIDIA Device At PCI Bus 0x0 Device 0xe Function 0x0:

Vendor ID = 0x10de DeviceID = 0x0266

NVIDIA Device At PCI Bus 0x0 Device 0x10 Function 0x0:

Vendor ID = 0x10de DeviceID = 0x026f

NVIDIA Device At PCI Bus 0x0 Device 0x10 Function 0x1:

Vendor ID = 0x10de DeviceID = 0x026c

NVIDIA Device At PCI Bus 0x0 Device 0x14 Function 0x0:

Vendor ID = 0x10de DeviceID = 0x0269

========== Other PCI Device Information ==========

Device At PCI Bus 0x0 Device 0x18 Function 0x0:

Vendor ID = 0x1022 DeviceID = 0x1100

Device At PCI Bus 0x0 Device 0x18 Function 0x1:

Vendor ID = 0x1022 DeviceID = 0x1101

Device At PCI Bus 0x0 Device 0x18 Function 0x2:

Vendor ID = 0x1022 DeviceID = 0x1102

Device At PCI Bus 0x0 Device 0x18 Function 0x3:

Vendor ID = 0x1022 DeviceID = 0x1103

Device At PCI Bus 0x3 Device 0x0 Function 0x0:

Vendor ID = 0x14e4 DeviceID = 0x4312

Device At PCI Bus 0x7 Device 0x5 Function 0x0:

Vendor ID = 0x1180 DeviceID = 0x0832

Device At PCI Bus 0x7 Device 0x5 Function 0x1:

Vendor ID = 0x1180 DeviceID = 0x0822

Device At PCI Bus 0x7 Device 0x5 Function 0x2:

Vendor ID = 0x1180 DeviceID = 0x0843

Device At PCI Bus 0x7 Device 0x5 Function 0x3:

Vendor ID = 0x1180 DeviceID = 0x0592

Device At PCI Bus 0x7 Device 0x5 Function 0x4:

Vendor ID = 0x1180 DeviceID = 0x0852

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...