have some questions on fermi drivers

[rotpar]

hi am new to all of this. and i need some help.

this is my laptop

dell precision m4600

quadro 2000M   ( PCI\VEN_10DE&DEV_0DDA&SUBSYS_14A31028 )

windows 10

i was using for long time official driver v 377 from nvidia website. i came across driver version 390.65 wich works ok. so i decided to try and see if i can get a newer or latest driver i could use with my GPU. and after some resarch ive read that  391.35 its the latest for fermi. and also seen some 392.00 drivers.  this wont install copatibility fails.

so found out that nvcleanstall can add id hardware. i already use it to remove stuff.

from driver i only need dirver (of couse) physix, optimus and hdmi hd audo.   when i use this and add the hardware id it installs but there are some problems and here is where i need help if someone could help or exlpain..

driver installs cann see it on device manager no error there..

but if i try to open nvidia control panel then i get error  nvidia settings are not available / currently not attached ect ect.

when i do a bench mark the name of the GPU and temp downt show. also in nvidia inspector name and GPU are blank..

so what am i doing wrong.??

am i stuck on 390.65.???  why i face this error on drivers that i added hardware id.

thank you in advance

[StefanG3D]

Upload some GPU-Z screenshots (use the camera button at top right)

From main tab and sensor tab

Check all capabilities in advanced tab

[rotpar]

4 hours ago, StefanG3D said:

Upload some GPU-Z screenshots (use the camera button at top right)

From main tab and sensor tab

Check all capabilities in advanced tab

here they are. am not sure if you want modded or the one that works.. right now am using the one that works 390.65

Edited May 31, 2023 by rotpar

[StefanG3D]

13 minutes ago, rotpar said:

here they are. am not sure if you want modded or the one that works.. right now am using the one that works 390.65

In these screenshots everything looks as expected.

I meant from the modded ones to get a glimpse what's missing.

You can quickly flip drivers using previous driver option in device manager.

[rotpar]

3 hours ago, StefanG3D said:

In these screenshots everything looks as expected.

I meant from the modded ones to get a glimpse what's missing.

You can quickly flip drivers using previous driver option in device manager.

ok sorry. here it is..

 

[rotpar]

here some other screenshot i took.

 

[rotpar]

back on 390.65

some pictures.

on nvidia inpsctor here has name and GPU but on 391 is blank picture on post above.

Edited May 31, 2023 by rotpar

[StefanG3D]

36 minutes ago, rotpar said:

ok sorry. here it is..

 

In this screenshot you see that CUDA and OpenCL (which is dependent on it) are missing.

Probably you find a hint when checking "view all events" in device manager.

IDK how thoroughly NVCleanstall had been tested with Fermi architecture drivers.

 

Try this driver, the last one i had modded

GeForce 392.62 Quadro Fermi (+ mod. INF)

 

[rotpar]

10 hours ago, StefanG3D said:

In this screenshot you see that CUDA and OpenCL (which is dependent on it) are missing.

Probably you find a hint when checking "view all events" in device manager.

IDK how thoroughly NVCleanstall had been tested with Fermi architecture drivers.

 

Try this driver, the last one i had modded

GeForce 392.62 Quadro Fermi (+ mod. INF)

 

i see they are not ticked  the CUDA and OPENCL.

tried your driver and INF. same thing... will check logs later

 

 

[rotpar]

have question. why some drivers have optimus in it.. the 392.62 driver you modded doesnt have it. is there a way to tell it has optimus in it.?

now here is event viewer logs

uloaded a exported log .. just in case ill paste logs

Device PCI\VEN_10DE&DEV_0DDA&SUBSYS_14A31028&REV_A1\4&2bff4559&0&0008 requires further installation.

event id 430

_______________________________________________________________________________________________________________________

 

Device PCI\VEN_10DE&DEV_0DDA&SUBSYS_14A31028&REV_A1\4&2bff4559&0&0008 was configured.

Driver Name: display.inf
Class Guid: {4d36e968-e325-11ce-bfc1-08002be10318}
Driver Date: 06/21/2006
Driver Version: 10.0.19041.868
Driver Provider: Microsoft
Driver Section: MSBDA
Driver Rank: 0xFB2006
Matching Device Id: PCI\CC_0300
Outranked Drivers: 
Device Updated: false
Parent Device: PCI\VEN_8086&DEV_0101&SUBSYS_04A31028&REV_09\3&11583659&0&08

event id 400

_________________________________________________________________________________________________________________________

ERROR

Device PCI\VEN_10DE&DEV_0DDA&SUBSYS_14A31028&REV_A1\4&2bff4559&0&0008 had a problem starting.

Driver Name: display.inf
Class Guid: {4d36e968-e325-11ce-bfc1-08002be10318}
Service: BasicDisplay
Lower Filters: 
Upper Filters: 
Problem: 0x1F
Problem Status: 0xC01E0438

event id 411

__________________________________________________________________________________________________

Driver Management has concluded the process to add Service nvlddmkm for Device Instance ID PCI\VEN_10DE&DEV_0DDA&SUBSYS_14A31028&REV_A1\4&2BFF4559&0&0008 with the following status: 0.

event id 20003

test.evtx